Furniture Pads Floor Protectors 3x1M - Light Grey

These Shinfly furniture pads are designed for hard, smooth surfaces like wood, tile, or laminate. They are not effective on carpet.

The pads are rated to withstand furniture weighing up to 180kg.

You can use sharp scissors or a utility knife to cut the felt pads to your desired shape and size. Ensure you have a clean, flat surface for cutting.

The lifespan of the pads depends on usage and furniture weight. However, their durable 4mm thickness and strong adhesive are designed for long-lasting performance. Regular inspection and replacement when worn are recommended.

These pads are designed for indoor use on smooth surfaces. Outdoor conditions and exposure may affect their adhesion and durability.

They are not recommended for use on rough, textured, or uneven surfaces, as well as carpet, as the adhesive may not hold properly.

Yes, Shinfly offers these furniture pads in Black, White, and Brown variants in addition to Light Grey.

Ensure the furniture surface is thoroughly cleaned and dried before application. The surface must be smooth and free of dust, oil, or wax. For difficult surfaces, ensure you are pressing firmly for at least 30 seconds after application.

This can happen if the furniture surface is not properly prepared or if the weight capacity is exceeded. Re-clean the surface, re-apply the pad with firm pressure, and ensure the furniture weight is within the 180kg limit.

Check if the pads are applied evenly to all legs and are fully in contact with the floor. Ensure the furniture is not rocking or unstable, which can cause noise even with pads applied.

While the pads are 4mm thick for optimal protection, they can be carefully trimmed to a slightly thinner profile if necessary, though this may reduce their effectiveness. Ensure you cut cleanly for the best results.