Arctic CPU Water Cooler - White

The fans operate between 200 RPM and a maximum of 2000 RPM, with PWM support for speed control.

Yes, the Liquid Freezer III 240 A-RGB typically comes with MX-6 thermal compound either pre-applied to the cold plate or included separately in the package.

Arctic generally offers a 6-year manufacturer's warranty on their Liquid Freezer series products.

Yes, the A-RGB lighting is digitally addressable and can be controlled via compatible motherboard software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion) using the standard 3-pin A-RGB connector.

The 60mm VRM fan on the pump housing actively cools the motherboard's voltage regulator modules (VRMs), which is especially beneficial for high-power CPUs and systems with poor case airflow.

The cooler can be connected either through a provided splitter cable for separate control of pump, VRM fan, and radiator fans, or via a single connection for all-in-one control, similar to previous models.

The radiator measures 27.7 cm in width, 12 cm in height, and 3.8 cm in depth.

Yes, the Liquid Freezer III is designed to be future-proof and includes mounting hardware for the Intel LGA1851 socket.

Ensure all fan and RGB connectors are securely plugged into the motherboard or controller. Verify that the fan header is enabled in the BIOS and set to the correct control mode (PWM). Check if the RGB lighting is controlled via motherboard software and ensure it is configured correctly.

Confirm the pump's 4-pin connector is properly seated on the motherboard's CPU_FAN or AIO_PUMP header. Check the pump speed in your BIOS or monitoring software; it should be within the specified RPM range (800-2800 RPM). If noise persists, contact support as the pump may be faulty.

Verify that the cooler is mounted correctly with even pressure. Ensure the protective plastic film has been removed from the cold plate. Check that the thermal paste application is adequate and that the radiator fans and pump are spinning at sufficient speeds. Clean dust from the radiator and fans.

If the radiator interferes with a large M.2 cooler, contact Arctic support for their complimentary M.2 cooler solution, which allows for revised mounting.