Best current price£8.62from The Range
Shopping.co.uk recommended and popular offers
The Range£8.62Visit shop Unifix Mudguard (Penny) Washers M10 X 25 X 1.5 - Ubwsmms10 025 100 - Box Of 500 - Blue
Visit shop5 offers from £8.62 - £9.71
View price history by clicking the chart icon.
The Unifix Mudguard (Penny) Washers in blue finish are essential hardware components designed for DIY enthusiasts and mechanics who require a larger surface area for secure fastening. These M10 washers are ideal for automotive, bicycle, and general construction projects where distributing pressure is critical to prevent surface damage. While highly effective for heavy-duty applications, users should ensure these washers are used with compatible M10 bolts and that the blue finish is appropriate for the aesthetic requirements of their specific project.
| Colour | Blue |
|---|---|
| Model Part Number | Ubwsmms10 025 100 |
| Brand | Unifix |
While the blue finish offers some protection, they are primarily designed for general hardware use. For extreme outdoor or saltwater environments, consider a rust-proof alternative.
No, these are designed for M10 bolts. An M10 washer on an M8 bolt will have excessive clearance and may not provide a secure, centered fit.
The 25mm refers to the outer diameter (OD) of the washer, which is the total width across the washer.
The finish is designed to be durable, but it may dull or scratch if exposed to harsh chemicals, direct sunlight, or abrasive tools over a long period.
Yes, if you need to build up space or manage excess bolt thread, you can stack these washers, provided the bolt is long enough to fully engage the nut threads.
Verify the project requirements; if space is tight, a standard M10 washer may be required, or the mounting bracket may need repositioning.
Ensure the bolt is tightened to the correct torque specification and that the surface beneath the washer is flat and clean.
To ensure proper installation, always ensure your bolt thread matches the M10 specification. Slide the washer onto the bolt shank until it rests against the bolt head or the object being secured. When tightening, apply torque incrementally to ensure the washer sits flat against the surface.
Compatibility:
| Component | Requirement |
| :--- | :--- |
| Bolt Size | M10 |
| Hole Diameter | Must be less than 25mm |
| Application | Automotive, Bicycle, General Repair |
Care:
