Best current price£9.80from B&Q
Shopping.co.uk recommended and popular offers
B&Q£9.80Visit shop B&Q - Single 20A Double Pole SwitchClassic Victorian Brass With Black RockerXv20B
Visit shop2 offers from £9.80 - £15.09
View price history by clicking the chart icon.
The Varilight 1-Gang 20A Double Pole Rocker Switch is designed for homeowners and professional electricians looking for a durable, high-capacity control solution for heavy-duty appliances. Its primary benefit is the 20A rating, allowing it to safely manage high-load circuits, though its sleek black finish requires careful handling during installation to maintain the pristine aesthetic of the faceplate.
| Colour | Black |
|---|---|
| Model Part Number | XV20B |
| Brand | Varilight |
While it is technically capable of handling lighting loads, a 20A double pole switch is typically overkill for standard lighting. It is best suited for high-power appliances.
Double pole means the switch breaks both the live and neutral connections, providing an extra layer of safety compared to a single pole switch.
No, this model is designed for indoor use. Outdoor installation requires a switch with an appropriate IP (Ingress Protection) rating.
A standard flat-head or Pozidriv screwdriver is usually sufficient, depending on the specific terminal screws provided.
It is not recommended to paint the switch, as it may interfere with the movement of the rocker or affect the electrical safety of the unit.
The terminals are designed to accommodate standard house wiring sizes typically found in UK domestic circuits.
Check that the mounting screws are tightened correctly and that the switch is not obstructed by excess cabling in the wall box.
Verify that all wire connections at the terminal block are secure and that the circuit breaker in your consumer unit is in the ON position.
The finish is permanent; ensure only non-abrasive cleaning methods are used to maintain the surface integrity.
Installation Requirements: This product must be installed by a qualified electrician in accordance with current IET Wiring Regulations. Ensure that the power is fully isolated at the consumer unit before beginning any installation work.
Compatibility: The unit is designed to fit standard 1-gang UK electrical wall boxes. Check that your existing back box has sufficient depth to accommodate the internal mechanism and the wiring terminals.
Maintenance: Clean the faceplate with a soft, dry, lint-free cloth. Avoid the use of abrasive scouring pads, chemical cleaners, or detergents, as these can strip the black finish and cause discoloration or scratching.
