Philips OneBlade 360 Replacement Blades for Face - 1 Pack - QP410/50

For optimal performance and hygiene, it's recommended to replace your Philips OneBlade 360 blade approximately every 4 months, based on average use. You might need to replace it sooner if you notice dullness, pulling, or reduced shaving effectiveness.

Yes, the Philips OneBlade 360 replacement blades are IPX7 waterproof, allowing for both wet and dry shaving. You can use them with or without shaving foam, and even in the shower.

This 360 blade is compatible with most OneBlade models (QP25xx, QP26xx, QP27XX, QP28XX) and OneBlade Pro models (QP6504, QP653x, QP654x, QP665x). However, it is not compatible with older models such as QP1XXX, QI1XXX, QP652x, QP651x, QP662x, and QP6505. Please check your specific model number.

After each use, simply rinse the blade and your OneBlade handle under running water to remove any hair or residue. Shake off excess water and allow it to air dry completely before storing.

The key difference is the 360-degree flexing technology. The 360 blade can flex in all directions, allowing it to constantly adjust to your face's contours, maintaining better skin contact for a more comfortable and efficient shave, especially in hard-to-reach areas, compared to fixed or less flexible blades.

The OneBlade 360 blade features a glide coating, rounded tips, and a dual protection system designed to minimize nicks and irritation. While individual results may vary, it's engineered for comfort, making it suitable for sensitive skin. Ensure you're using proper technique and not applying excessive pressure.

First, double-check your OneBlade handle's model number against the compatibility list provided in the 'Compatibility' section. If your model is listed as incompatible, the blade will not fit. Ensure you are pushing the blade firmly onto the connector until you hear a click. Do not force it if there is significant resistance.

Ensure the blade is clean by rinsing it thoroughly under running water. Sometimes debris can accumulate. If the blade is past its recommended 4-month lifespan, replace it. Shaving against the grain with gentle pressure is recommended for a closer shave; adjust your technique. If the issue persists with a new, clean, compatible blade, contact Philips customer support.

For best results, shave against the grain. Ensure the blade is clean and not past its 4-month lifespan. The unique design of OneBlade is for trimming, edging, and shaving *without getting as close as a traditional razor*, to prevent irritation. If you're expecting a 'baby smooth' shave like a multi-blade razor, OneBlade's design prioritizes skin comfort.

Ensure the blade was properly attached with an audible 'click' during installation. If it wasn't fully seated, it may detach. Also, avoid excessive pressure or twisting motions during shaving that could dislodge it. If the connection point on your OneBlade handle appears damaged, this might be the cause.