Rustins Chalky Finish Paint - Blenheim Blue

For most surfaces, especially wood and previously painted items, minimal preparation is needed. However, for very porous surfaces or dark colours you wish to cover, a primer can help ensure even coverage and better adhesion.

No, Rustins Chalky Finish Paint is not recommended for floors or surfaces that experience heavy foot traffic, as it does not provide the necessary durability for such applications.

The paint is touch-dry in approximately 30-60 minutes, but recoating or applying a wax finish should ideally wait for at least 2-4 hours, or until fully dry.

The paint contains wax for a smooth finish and often doesn't require a separate topcoat for decorative items. However, for increased durability, especially on high-use items like tabletops or chairs, applying a furniture wax or a clear lacquer is recommended.

Yes, it can be used on kitchen cabinets, but it is highly recommended to seal the finish with a durable topcoat or wax to protect against moisture and frequent handling.

For a smooth finish, use a good quality synthetic bristle brush or a short-nap roller. Apply in thin, even coats, brushing or rolling in the same direction to avoid brush marks.

Yes, provided the varnish is clean and degreased. Lightly sanding the surface to create a key will significantly improve adhesion.

Ensure the paint is thoroughly stirred before and during use. Apply in thin, even coats, working in one direction. Avoid overworking the paint.

Surface preparation may have been insufficient. Ensure the surface was clean, dry, and lightly abraded if glossy. Apply a second coat if the first was too thin.

This is characteristic of a chalky finish. For a smoother feel, a light sanding with fine-grit sandpaper (e.g., 240-grit) can be done once fully cured, followed by a protective wax or sealant if desired.

In very dry conditions, a small amount of water (less than 5%) can be added to thin the paint slightly. Stir well. Avoid adding too much water, as this can compromise the finish.