Behringer Ultra Chorus UC200 - Blue
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Behringer Ultra Chorus UC200 is an effects pedal designed for guitarists seeking to enrich their sound with a thick, stereo chorus effect. It's ideal for musicians looking to add depth and dimension to their tone for various musical genres, though its primary focus is on chorus effects, limiting its versatility for other sound modifications. Key features include dedicated Level, Tone, Rate, and Depth controls for detailed sound shaping, a status LED for effect on/off and battery status, and a high-quality electronic bypass switch.
All features
| Colour | Blue |
|---|---|
| Model Part Number | UC200 |
| Brand | Behringer |
Extended Product Information
FAQs
Does the Behringer UC200 come with a power supply?
No, the UC200 can be powered by a 9V battery or a separate Behringer PSU-SB DC power supply, which must be purchased independently.
Can I use this pedal with a bass guitar?
Yes, the UC200 can be used with a bass guitar to add chorus effects, though results may vary depending on the specific bass tone and amplifier.
What is the difference between 'Rate' and 'Depth' controls?
The 'Rate' control adjusts the speed of the chorus modulation (how fast the sound 'wavers'), while the 'Depth' control adjusts the intensity or width of the modulation (how pronounced the effect is).
Can I run the UC200 in stereo?
Yes, the UC200 features stereo outputs, allowing you to connect to two amplifiers or a stereo input for a wider, more immersive chorus sound.
How do I replace the battery?
Turn the pedal over. There is a compartment secured by a screw. Unscrew it, replace the 9V battery, and re-secure the compartment.
What is the 'Tone' control for?
The 'Tone' control allows you to shape the brightness or darkness of the chorus effect. Turning it up can make the effect brighter, while turning it down can make it darker or warmer.
Troubleshooting
No sound when pedal is engaged
Check that the battery is installed correctly and has power, or that the DC power supply is connected and functioning. Ensure that the input and output cables are securely plugged into the correct jacks.
Effect sounds weak or distorted
Adjust the Level control to ensure it's not clipping the input of your amplifier. Check the battery or power supply for sufficient power. Experiment with the Tone control to find a clearer frequency range.
Hum or noise when effect is on
Ensure that the power supply is a high-quality, isolated unit. Try powering the pedal with a battery to rule out power supply interference. Keep audio cables away from power cables where possible.
Bypass signal sounds thin or weak
While the electronic bypass is designed for signal integrity, ensure your cables are in good condition and that the signal chain isn't overly long, which can degrade tone regardless of the pedal. The UC200's bypass is generally robust.
Pros and Cons
Pros
- Offers comprehensive control over chorus parameters for versatile sound sculpting.
- Delivers a rich and full stereo chorus effect.
- Durable construction ensures long-term reliability.
- Provides clear visual feedback with its status LED.
- Includes a high-quality electronic bypass to maintain signal integrity.
Cons
- Primarily focused on chorus effects, limiting its utility for other sound modifications.
- Requires a separate power supply or battery, which may not be included.
- As an analog pedal, it may introduce subtle noise floor in certain setups.
- The 'Tone' control might be too subtle for some users' preferences.
- Not a multi-effects unit, so advanced sound design options are limited.
Setup, Compatibility & Care
Setup:
- Connect your guitar to the INPUT jack and the OUTPUT jack to your amplifier or the next pedal in your signal chain.
- Power the pedal using a 9V battery (inserted into the battery compartment) or a compatible 9V DC power supply (center negative, sold separately).
- Adjust the Level, Tone, Rate, and Depth controls to achieve your desired chorus sound.
Compatibility:
- The UC200 is compatible with most electric guitars and basses.
- It works with standard guitar amplifiers and audio interfaces.
- For stereo operation, use both OUTPUT jacks with two amplifiers or a stereo input device.
Care:
- Keep the pedal clean by wiping it with a dry or slightly damp cloth. Avoid harsh chemicals.
- Protect the pedal from extreme temperatures and moisture.
- When not in use, disconnect the power supply or remove the battery to conserve energy and prevent battery leakage.
- Store in a safe place to prevent physical damage.