GROHE Start Spare Soap Dispenser - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The GROHE Start Soap Dispenser in Black is designed for users seeking a quick, tool-free installation of bathroom accessories. Its key benefit is the innovative QuickGlue system, allowing for a secure and permanent fixture without drilling. A potential caveat is the need to purchase the appropriate QuickGlue set separately based on the accessory's mounting plate.
All features
| Colour | Black |
|---|---|
| Model Part Number | 411882430 |
| Brand | GROHE |
Extended Product Information
FAQs
Do I need to drill holes to install this soap dispenser?
No, the GROHE Start soap dispenser utilizes the QuickGlue system, which allows for installation without drilling. You will need a separate QuickGlue set.
What surfaces can I use the QuickGlue on?
The QuickGlue system is effective on tiles, stone, glass, concrete, and metal surfaces, provided they are clean and smooth.
How long does the QuickGlue take to set?
Curing times vary based on the specific QuickGlue set used. Please refer to the instructions included with your QuickGlue set for precise details.
Can I remove the soap dispenser after it's been glued?
The mounting plate, once attached with QuickGlue, is designed for a permanent fixture. Removal may be possible but could damage the surface or the mounting plate.
How do I refill the soap dispenser?
Unscrew the top pump mechanism from the dispenser bottle. Fill the bottle with liquid soap, then reattach the pump mechanism securely.
What is the GROHE Long-Life Finish?
It is GROHE's advanced multilayered coating technology that creates an extremely hard-wearing and durable surface, ensuring a lasting aesthetic appeal and resistance to scratches and tarnishing.
Troubleshooting
Dispenser does not dispense soap
Ensure the dispenser head is properly screwed onto the bottle and that the pump mechanism is primed. Check if the soap level is too low.
QuickGlue bond seems weak
Verify that the surface was thoroughly cleaned and dried before application. Ensure sufficient glue was used and that the mounting plate was held firmly during the curing process. Consult the QuickGlue instructions for specific curing times.
Finish is discolored or scratched
Wipe gently with a damp cloth and mild soap. Avoid using abrasive cleaning agents or tools.
Pros and Cons
Pros
- Extremely easy and fast installation without tools.
- No need for drilling, preserving wall surfaces.
- Durable and long-lasting finish.
- Simple to maintain and keep clean.
- Suitable for a variety of common bathroom surfaces.
Cons
- QuickGlue set sold separately.
- Permanent adhesion means careful placement is required.
- Not suitable for very rough or uneven surfaces where a strong bond cannot be achieved.
Setup, Compatibility & Care
Setup:
- Ensure the surface (tiles, stone, glass, concrete, metal) is clean, dry, and free from dust or grease.
- Select the appropriate QuickGlue set: a single set (41127000) for accessories with one mounting plate, or a double set (41128000) for accessories with two mounting plates.
- Attach the adapter to the mounting plate of the soap dispenser.
- Dispense the glue from the syringe into the adapter.
- Firmly press the mounting plate onto the prepared surface and hold for a few moments.
- Allow the glue to cure fully according to the QuickGlue set instructions before use.
Compatibility:
The QuickGlue system is designed to adhere to a wide range of smooth, non-porous surfaces including tiles, stone, glass, concrete, and metal. It is compatible with GROHE accessories that utilize a single or double mounting plate system.
Care:
To maintain the dispenser's pristine appearance, wipe regularly with a soft, damp cloth. For tougher spots, use a mild soap solution. Avoid abrasive cleaners or scouring pads, which can damage the GROHE Long-Life Finish.