MOTUL MOTOCOOL FACTORYLINE -35°C - 1 Litre

No, you should never mix this OAT-based coolant with conventional coolants or other types of coolant additives. Mixing can compromise its protective properties and potentially damage your cooling system.

No, this is a 'ready-to-use' coolant. It is pre-diluted to the correct concentration for optimal anti-freeze and anti-corrosion performance. Adding water will dilute its protective capabilities.

OAT stands for Organic Acid Technology. It uses organic acids to provide long-lasting protection against corrosion, especially for modern engine metals like aluminium and magnesium, and allows for extended service intervals.

Refer to your motorcycle manufacturer's service manual for recommended drain intervals. The OAT technology in this coolant allows for extended intervals compared to conventional coolants.

This coolant is specifically designed for high-performance motorbikes, particularly those with modern engine designs utilizing aluminium and magnesium alloys. Always confirm compatibility with your specific motorcycle model's requirements.

Although it contains a bitterness agent, coolants are harmful if swallowed. Seek immediate medical attention and show the product label or container to the medical professional.

The boiling point of MOTUL MOTOCOOL FACTORYLINE is 136°C (277°F) at atmospheric pressure.

Ensure the system is full and properly bled of air. Check for any blockages in the radiator or hoses. Verify the thermostat is functioning correctly.

Check for leaks in hoses, the radiator, or the water pump seal. A consistent drop may indicate a more serious internal leak.

This may indicate that the coolant has exceeded its service life or that incompatible coolants were previously used. Flush the system thoroughly and refill with the correct MOTUL MOTOCOOL FACTORYLINE.

This could be a sign of contamination or breakdown of the coolant. It is recommended to flush the entire cooling system and refill with fresh MOTUL MOTOCOOL FACTORYLINE.