Sika Frosterproofer - 1L

You can work with Sika MaxMix Frostproofer and Accelerator in air temperatures down to -2°C. It provides frost protection to the setting concrete or mortar below -4°C.

The product is concentrated, with 1 litre treating up to 100kg of cement. For smaller quantities, calculate the proportion based on this ratio (e.g., 100ml per 10kg of cement).

Yes, the Sika MaxMix Frostproofer & Accelerator is chloride-free, meaning it will not attack or corrode embedded steel, making it safe for use with rebar and brick ties.

The product comes in a spill-proof bottle with a measured dosing system designed for easy and accurate application of the concentrate.

When used at the recommended dosage, Sika MaxMix Frostproofer & Accelerator is designed to enhance performance in cold conditions and improve workability, without negatively impacting the final strength. Always follow recommended application rates.

Yes, it is suitable for use in sand and cement based mortars, renders, screeds, and concrete.

Please refer to the product packaging or Sika's official documentation for the specific shelf life. It is generally recommended to store in original, sealed containers in a cool, dry place.

Verify that the correct dosage of Sika MaxMix was used and that it was added to the mixing water. Ensure ambient temperatures are not significantly below the product's stated effective range (-2°C, or -4°C for frost protection).

Ensure consistent mixing of the admixture with the water and thorough incorporation into the dry mix. Check for any variations in the dry components or ambient conditions.

Ensure the spill-proof cap is functioning correctly. Shake the bottle gently if contents appear settled, though it is a liquid concentrate. Use a calibrated measuring jug if the integrated system proves challenging.

This may not be directly related to the frostproofer but could be due to cement type, water-cement ratio, or environmental conditions. Ensure proper curing practices are followed.