Farrow & Ball Estate Emulsion Paint Sample Pot - Brown - 100Ml

The 100ml sample pot covers up to 1m² on average, which is ideal for testing colours on a wall.

No, the 100ml pot is specifically designed for colour testing and is not sufficient for painting a full room.

Estate Emulsion has a chalky matt finish, which is a signature look for Farrow & Ball paints.

Drying times can vary, but generally, Estate Emulsion is touch dry within 2 hours and ready for recoating after 4 hours. Always refer to the product instructions for precise drying times.

Yes, Farrow & Ball Estate Emulsion is suitable for use on interior walls and ceilings.

Ensure the wall is clean, dry, and free from any dust or grease. Lightly sand glossy surfaces to ensure good adhesion.

It is not recommended to mix sample pots with other Farrow & Ball paints, as this can affect the final colour and finish.

Ensure the surface is properly prepared and primed. Stir the paint thoroughly before and during application. Apply in thin, even coats.

The surface may not have been cleaned or prepared adequately. Ensure the surface is free from dust, grease, and has been lightly sanded if previously glossy.

This is often due to lighting conditions or surface preparation. Test the colour on different walls that receive varying light throughout the day before committing.