Best current price£44.77from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£44.77Visit shop Johnstones Exterior Wood & Metal Hardwearing Gloss Paint 2.5L Sherwood 5010426743929
Visit shop2 offers from £44.77
View price history by clicking the chart icon.
This Johnstone's Exterior Hardwearing Gloss paint is designed for DIY enthusiasts and professional decorators looking to protect and enhance exterior wood and metal surfaces. Its key benefit is a durable, water-resisting, high gloss finish that offers long-lasting weather protection. A potential caveat is that proper surface preparation is crucial for optimal adhesion and finish.
| Colour | Green |
|---|---|
| Model Part Number | 303946 |
| Brand | Johnstone's |
This paint is suitable for exterior wood, metal, and plastic surfaces. Ensure surfaces are properly prepared and primed if necessary.
Two coats are generally recommended for optimal durability and a uniform finish. Allow sufficient drying time between coats.
No, it is best to apply this paint in dry conditions. Avoid painting when rain is expected or if the surface is damp.
Clean brushes and equipment immediately after use with white spirit.
Surfaces should be clean, dry, and free from dust, grease, and flaking paint. Bare wood and metal will require appropriate priming.
The paint provides a durable, weather-resistant coating that protects against the elements, which includes protection from UV degradation, helping to maintain color and finish.
Yes, provided the existing paint is sound and well-adhered. Lightly abrade glossy surfaces before application.
Ensure the surface was properly prepared, clean, dry, and free from contaminants. Re-prime if necessary.
Stir the paint thoroughly. Apply thin, even coats. Avoid over-brushing. Ensure application conditions are suitable (not too hot, cold, or humid).
Check environmental conditions. Lower temperatures and high humidity can significantly slow drying. Ensure adequate ventilation.
Stir well. If necessary, thin slightly with a maximum of 10% white spirit for brush application, following manufacturer guidelines.
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and flaking paint. For bare wood, apply a suitable primer. For metal, use a rust-inhibiting primer. If painting over existing gloss, lightly abrade the surface.
Application: Stir thoroughly before use. Apply with a good quality brush or roller. Avoid applying in wet or very cold conditions. Typically, two coats are recommended for optimal durability and finish.
Compatibility: Suitable for exterior wood, metal, and plastic surfaces. Not recommended for use on floors or areas subject to heavy abrasion.
Care: Clean brushes and equipment immediately after use with white spirit. Store paint in a cool, dry place, away from direct sunlight and frost. Ensure the lid is tightly sealed.
