Ft Paints Water-Based Polyurethane Paint - 100 ml - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for professionals and enthusiasts working on vehicles, machinery, and metal structures that require a durable, high-performance finish. The key benefit is superior protection against mechanical and chemical stress with excellent UV and weather resistance. A potential caveat is the 2K system requiring proper mixing and application techniques. The Ft Paints RT 2K PU Topcoat is a premium waterborne polyurethane coating designed for demanding environments, offering a semi-gloss finish with excellent resistance properties and heat stability up to 180°C.
All features
| Colour | Grey |
|---|---|
| Model Part Number | FT-WPU2425-100SAM-S-CV |
| Brand | FT Paints |
| Container Volume | 100 ml |
Extended Product Information
FAQs
What is the shelf life of the RT 2K PU Topcoat?
Refer to the product packaging for the specific shelf life. Once mixed, the pot life is limited and must be used within the recommended time.
Can this topcoat be applied with a brush or roller?
While spraying is recommended for optimal finish and performance, specific application techniques for brushing or rolling may be possible. Consult the technical data sheet for guidance on alternative application methods.
What is the recommended temperature for application?
The ideal application temperature range is typically between 15°C and 25°C. Always refer to the product's technical data sheet for precise recommendations, as extreme temperatures can affect curing and finish quality.
How long does it take to fully cure?
The coating is dust-dry in approximately 1-1.5 hours and reaches full cure in 7-8 days under standard conditions. Avoid stressing the coated surface until full cure is achieved.
Is this product suitable for food contact surfaces?
This product is engineered for industrial and automotive applications and is not certified for food contact. Use appropriate coatings for surfaces that will come into direct contact with food.
What safety precautions should be taken when using this product?
Always use in a well-ventilated area. Wear appropriate personal protective equipment (PPE), including gloves, eye protection, and a respirator suitable for organic vapors and particulates. Consult the Safety Data Sheet (SDS) for detailed safety information.
Troubleshooting
Coating is not curing properly or remains soft
Ensure the topcoat and hardener were mixed in the correct ratio and thoroughly combined. Verify that the ambient temperature and humidity are within the recommended application range. Check that the correct hardener for this specific 2K product was used.
Poor adhesion to the substrate
Verify that the surface was properly prepared (clean, dry, free of contaminants). Ensure a compatible primer (WEP Primer) was used and was properly cured before topcoat application.
Uneven finish or runs during application
Adjust spray technique, including gun speed, distance, and overlap. Ensure the viscosity of the paint is correct for the application method by following thinning guidelines if provided. Utilize the extended open time to achieve a smooth finish.
Pinholing or blistering
Check for moisture or contamination on the substrate or in the spray equipment. Ensure proper ventilation during application and drying. Avoid applying too thickly in one coat.
Pros and Cons
Pros
- High mechanical and chemical resistance for demanding applications.
- Excellent UV and weather resistance ensures long-term durability.
- Fast drying time speeds up project completion.
- Good heat resistance for applications near heat sources.
- Waterborne formula with reduced VOCs compared to solvent-based alternatives.
Cons
- Requires proper mixing of 2K components, which can be complex for novices.
- Specific application conditions (temperature, humidity) may be critical for optimal results.
- 100 ml sample size may not be sufficient for large projects.
- Requires compatible primers (WEP Primers) for best performance.
Setup, Compatibility & Care
Setup:
- Mixing: This is a 2K (two-component) system. Accurately mix the topcoat with the appropriate hardener according to the manufacturer's recommended ratio. Inadequate mixing will lead to improper curing and reduced performance.
- Application Method: Apply using conventional, airless, or HVLP spray equipment. Ensure equipment is clean and suitable for waterborne coatings.
- Surface Preparation: Ensure the surface is clean, dry, and free from grease, oil, and contaminants. For optimal results, apply over a compatible WEP Primer, ensuring it is properly cured and prepared.
Compatibility:
- Compatible with WEP Primers from FT Paints for enhanced adhesion and durability.
- Not recommended for direct application on substrates without a suitable primer.
Care:
- Clean surfaces with mild detergent and water. Avoid harsh solvents or abrasive cleaners that could damage the coating.
- Regular inspection for any signs of damage will help in timely touch-ups, extending the lifespan of the coating.