Hansgrohe Thermostatic Shower Mixer - Brushed Bronze
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Hansgrohe thermostatic shower mixer is designed for those seeking enhanced convenience and safety in their bathroom, particularly for exposed shower installations. Its key benefit is maintaining a consistent water temperature with reliable protection against scalding, all presented in a stylish brushed bronze finish. A caveat to consider is its requirement for high water pressure (minimum 1 bar). This mixer offers precise temperature control, safety features, and easy installation, making it a practical and aesthetically pleasing addition to many bathrooms.
All features
| Colour | Bronze |
|---|---|
| Model Part Number | 13116140 |
| Brand | Hansgrohe |
Extended Product Information
FAQs
What is the minimum water pressure required for this mixer?
This thermostatic shower mixer requires a minimum of 1 Bar of water pressure to operate effectively.
Can I connect multiple shower outlets to this mixer?
No, this model is designed to run one function, meaning it is intended for a single shower outlet such as a shower head.
How do I clean the brushed bronze finish?
Clean the finish with a soft, damp cloth. Avoid using abrasive cleaners or scouring pads that could scratch or damage the surface.
What is the purpose of the 40°C safety stop?
The safety stop is an optional feature that limits the maximum water temperature to 40°C, preventing accidental scalding. It can be set or bypassed during installation.
What is the warranty period for this product?
The Hansgrohe 13116140 comes with a 5-year manufacturer's guarantee against manufacturing defects.
Does this mixer come with a non-return valve?
Yes, a non-return valve is included to prevent the backflow of water.
What does WRAS Approved mean?
WRAS Approval signifies that the product has been tested and complies with the Water Supply (Water Fittings) Regulations 1999, ensuring it is safe for use with drinking water and meets water efficiency standards.
Troubleshooting
Water temperature is not consistent.
Ensure the water pressure meets the minimum requirement (1 bar). Check that the thermostat cartridge is clean and functioning correctly. Verify that the hot and cold water supplies are correctly connected.
Low water flow from the shower head.
Clean the dirt filters located at the inlet connections. Check the shower head itself for blockages. Ensure the Ecostop button is not engaged if maximum flow is desired.
Water is too hot, even when turned down.
The 40°C safety stop may not have been set during installation, or the maximum temperature limit needs adjustment. Refer to the installation guide for setting these features.
The mixer is leaking.
Check all connections for tightness. Inspect seals and O-rings for wear or damage and replace if necessary. Ensure the thermostat cartridge and ceramic valve are seated correctly.
Pros and Cons
Pros
- Provides consistent and safe water temperature.
- Stylish brushed bronze finish complements modern bathrooms.
- Easy to install due to exposed design, reducing installation complexity.
- User-friendly controls, safe even with wet or soapy hands.
- Offers water-saving features with the Ecostop button.
- High-quality materials and durable construction.
Cons
- Requires a minimum of 1 bar water pressure to function correctly.
- Exposed installation might not suit all aesthetic preferences.
- Designed for a single function (e.g., one shower head), limiting multi-outlet setups.
- The safety stop needs to be set during installation if required.
Setup, Compatibility & Care
Setup:
This exposed mixer is designed for straightforward installation onto existing water connections.
- Ensure your water system is suitable for high pressure (minimum 1 bar).
- Connect the mixer to your hot and cold water supply using flexible hoses (G ½ connection size).
- Mount the mixer to the wall, ensuring it is level and secure.
- If desired, adjust the maximum temperature and set the 40°C safety stop during installation.
- Connect your shower hose to the shower head connection.
Compatibility:
- Water Pressure: Suitable for high-pressure systems only (minimum 1 Bar, maximum 10 Bar).
- Installation Type: Designed for exposed installation.
- Functionality: Supports one shower head.
- Connection Size: DN15 (G ½).
Care:
To maintain the brushed bronze finish and functionality:
- Clean regularly with a soft, damp cloth.
- Avoid abrasive cleaners or harsh chemicals, as they can damage the finish.
- Periodically check and clean the dirt filters to ensure optimal water flow.