Lights4fun Trentham Battery Lantern - White

The lantern requires 3 x AAA batteries. These are not included with the product and must be purchased separately.

No, the light is a warm white, flickering LED designed to imitate the glow of a real flame. It is a safe alternative to a real candle.

The timer typically allows the lantern to stay on for 6 hours and then automatically switch off for 18 hours before repeating the cycle. Refer to the specific product manual for exact operation.

No, this lantern is designed primarily for indoor use. It can be used outdoors occasionally only when the weather is dry. It should be brought inside after use in outdoor conditions.

The lantern has a height of 30cm and a diameter of 13.5cm.

Clean the lantern using a soft, dry cloth. Avoid using liquids or abrasive cleaning agents to protect the finish.

The LED is designed to be long-lasting and is not typically user-replaceable. If the light stops working, check the batteries first.

Ensure batteries are inserted correctly with the correct polarity. Check that the batteries are fresh and not depleted. Verify the switch is in the 'On' or 'Timer' position.

Confirm the switch is set to the timer mode. Ensure the batteries have sufficient power, as low battery levels can affect timer operation. Re-check the specific timer settings as per the product manual.

This is often an intended feature to mimic a real flame. If the flickering is excessively erratic or the light is dim, try replacing the batteries.

Gently wipe the surface with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, but ensure the lantern is dried thoroughly immediately after.