Bona Craft Oil 2K - Neutral - 1.25L
Best current price£67.00from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£67.00Visit shop B&Q - Craft Oil 2K 1.25L Neutral (Pure)
Visit shopB&Q£67.00Visit shop One Offer
1 offer from £67.00
View price history by clicking the chart icon.
Product Information
Full details
Bona Craft Oil 2K is a professional-grade, plant-based wood finish designed for contractors and DIY enthusiasts who demand high durability and a sophisticated aesthetic for their wood flooring. Its unique 2-component formula offers accelerated drying times and superior wear resistance compared to traditional single-component oils, though it requires careful preparation and precise mixing to achieve the best results.
All features
| Colour | Beige |
|---|---|
| Brand | Bona |
Extended Product Information
FAQs
Can I use Bona Craft Oil 2K on any wood species?
It is suitable for most common interior wood species, but it is recommended to perform a small spot test first to ensure compatibility and desired look.
How long does the oil take to cure completely?
While it dries relatively quickly due to the hardener, it is best to allow 24-48 hours before subjecting the floor to normal foot traffic.
Is Bona Craft Oil 2K safe for residential homes?
Yes, it has low VOC emissions, making it a safer option for indoor environments compared to traditional solvent-based finishes.
Do I need to sand the floor before applying?
Yes, proper sanding is critical to opening the wood grain and allowing the oil to penetrate effectively.
Can I apply a topcoat over this oil?
Bona Craft Oil 2K is designed to be a complete finish, but in high-traffic areas, it may be compatible with specific maintenance products; check the technical data sheet for your specific system.
Troubleshooting
Oil is not drying within the expected time frame
Check the room temperature and humidity levels; high humidity or low temperatures can significantly slow down the curing process.
Streaky or uneven appearance after drying
Ensure that the excess oil was thoroughly buffed off the surface during the application process. Over-application often leads to a sticky or uneven finish.
Hardener did not mix properly
Ensure you are mixing the components in the correct ratios; if the hardener is not fully incorporated, the oil will not reach its full wear-resistance potential.
Pros and Cons
Pros
- Significantly faster drying time than standard oils
- High level of durability for high-traffic areas
- Low VOC content for a safer application environment
- Excellent penetration into wood fibers
- Professional-grade aesthetic finish
Cons
- Requires precise mixing of two components
- Limited pot life after the hardener is added
- Demands thorough surface preparation for even absorption
Setup, Compatibility & Care
Before application, ensure the wood surface is sanded to a raw state, clean, and free from dust or contaminants. Shake the container well before mixing. Combine the hardener with the oil according to the exact ratio specified on the packaging and stir thoroughly. Apply the mixture within the designated pot life window to avoid waste. For maintenance, use a neutral pH floor cleaner recommended by Bona. Avoid using abrasive cleaning agents or harsh chemicals, as these can degrade the oil layer over time. Regular dust mopping and the use of protective felt pads on furniture legs will significantly extend the lifespan of the finish.