Quest Puriclean Water System Cleaner And Purifier - 100g

It is recommended to use the Puriclean periodically, such as every 3-6 months, or before storing your vehicle for an extended period, and before first use after storage to ensure the water system is clean and safe.

No, this product is a cleaner and sterilizer for the water system. After treatment and thorough flushing, the water in your system should be safe for consumption. Always follow the product's usage and flushing instructions.

One 100g tub is designed to treat up to 15 gallons (approximately 68 liters) of water in your system.

Puriclean is primarily designed to sterilize and clean out bacteria, viruses, and fungi. While it can help clean pipes, it is not specifically a descaling agent for heavy mineral deposits.

It is not recommended to mix Puriclean with other cleaning agents or chemicals, as this could create hazardous reactions or reduce its effectiveness. Always use as directed.

For systems larger than 15 gallons, you would need to calculate the proportional amount of Puriclean required based on the 100g per 15-gallon ratio, or use multiple tubs if necessary. Always refer to the manufacturer's guidelines for dosage.

Ensure you are adding the powder to water and not vice versa, and stir gently if possible to aid dissolution.

Repeat the flushing process multiple times. Ensure all water has been drained from the system, including low points and the water heater if applicable. Check for potential external contamination sources.

Make sure the water was circulated through all taps (hot and cold) and that the pump was run to move the solution through the pipes effectively. Allow adequate standing time as per instructions.