Dc fix static cling window film borders really finish off your window, apply to the bottom edge fo...Dc fix static cling window film borders really finish off your window, apply to the bottom edge for a decorative effect. Many seasonal and festive designs available, but many can be used all year round. Quick and easy to apply to clean, smooth glass surfaces. Simply spray the glass with plenty of water, remove the backing paper and smooth into position, pushing the excess water out to the sides. If you make a mistake, peel back and start again. The water will dry out leaving a flawless finish. Remember to allow 5mm at the edges, the vinyl should be applied to the glass only and not touching the rubber seal around the door or window, this will cause the vinyl to come away from the glass.You can use normal household cleaners to clean the glass or remove the film entirely and reapply. No glue means the film pulls away from the glass leaving no residue and can even be re-used! CREATIVE TRANSFORMATION of your glass surfaces: Our self-adhesive window film instantly enhances windows, glass doors, and shower enclosures. Stylish window tint design meets effective privacy protection PRIVACY & LIGHT TRANSMISSION: Our nature pattern adhesive film offers reliable privacy without blocking daylight. Perfect for living rooms, offices, & bathrooms FLEXIBLE APPLICATION – not just for windows: Our privacy films are also suitable for glass walls, shower enclosures, and conservatories. Beautiful interior design – window covers can be removed without leaving any residue EASY TO CLEAN: To keep your frosted glass film looking fresh, just give it a quick wipe with warm water and a bit of washing-up liquid. Even stubborn marks don't stand a chance STATIC WINDOW FILM: Sticks without any glue – just cling it on! Easy to remove and reuse, even months later
This d-c-fix static cling window film is for homeowners and renters looking to add decorative flair and privacy to glass surfaces. Its key benefit is providing a stylish, customizable look without permanent alteration, though careful application is needed to avoid bubbles. This film offers a quick and easy way to transform windows, glass doors, and shower enclosures with a decorative effect, and can be removed without residue or reapplied.
All features
Colour
Grey
Model Part Number
F3214006
Brand
d-c-fix
Extended Product Information
FAQs
Do I need special tools to apply this film?
A spray bottle for water, a cutting tool (like scissors or a craft knife), and a smoothing tool (like a squeegee, credit card, or firm ruler) are recommended for best results.
How long will the film last?
With proper application and care, the film can last for several years. Longevity can be affected by environmental factors and cleaning methods.
Can I cut the film to a specific shape?
Yes, the film can be easily cut with sharp scissors or a craft knife to fit custom dimensions or shapes before application.
Will this film obscure the view completely?
No, this static cling film is designed to offer privacy without completely blocking daylight or the view from one side to the other, depending on the pattern's density.
Can I remove and reuse the film if I move?
Yes, because it uses static cling and no adhesive, the film can be carefully removed and reapplied to a new location, even after some time.
Is this film suitable for outdoor use?
The product is primarily designed for interior glass surfaces. Prolonged outdoor exposure to elements may affect its adhesion and appearance.
Troubleshooting
Film won't stick to the glass
Ensure the glass is thoroughly cleaned and wet. Dust or grease will prevent adhesion. Re-wet the glass generously.
Air bubbles or wrinkles after application
Carefully peel back the affected area and re-smooth it, pushing out the air and water towards the edges. Ensure the surface is wet enough for repositioning.
Film peeling away at the edges
Check if the film is touching the rubber seal. Ensure there is a 5mm gap between the film and the seal. Trim if necessary.
Difficulty removing backing paper
Ensure you are peeling from a corner. If it's sticking, a small piece of tape can help lift the backing paper.
Pros and Cons
Pros
No permanent alteration to glass surfaces
Easy to apply and reposition
Leaves no sticky residue upon removal
Reusable multiple times
Enhances privacy without blocking light
Cost-effective decorative solution
Cons
Requires careful application to avoid air bubbles
May not adhere well to textured or dirty glass
Needs to be kept 5mm away from rubber seals to ensure longevity
Limited to glass surfaces
Setup, Compatibility & Care
Setup:
Ensure the glass surface is clean and smooth. Use a standard household cleaner and ensure it is free of dust or grease.
Cut the film to the desired size, allowing a small overlap if needed, but remember to leave a 5mm gap from the edges and any rubber seals.
Thoroughly spray the glass with water. This is crucial for application.
Peel off the backing paper from the film.
Apply the film to the wet glass surface. You can slide it into position.
Use a smooth tool (like a squeegee or credit card) to push out excess water and air bubbles from the center outwards.
If you make a mistake, simply peel the film back and start again. The water allows for repositioning.
Compatibility:
Best suited for clean, smooth, non-porous glass surfaces.
Not recommended for textured glass, plastic surfaces, or glass with damaged seals.
Care:
Clean using normal household cleaners or a damp cloth with warm water and a small amount of washing-up liquid.
Avoid abrasive cleaners that could scratch the film.