UK PAINT - Shed and Fence Paint - 20L - Light Grey

For most surfaces, two thin coats are recommended for optimal coverage and durability. For very porous or dark substrates, a third coat might be beneficial.

This paint can be applied with a brush or roller. Ensure you use a good quality applicator and apply in thin, even coats for the best finish.

This paint is designed for sheds and fences, not for surfaces subjected to foot traffic like decking. Use a product specifically formulated for decking.

Drying times can vary depending on temperature, humidity, and application thickness. Typically, it's touch-dry in 1-2 hours and recoatable after 4-6 hours. Always refer to the product label for specific drying instructions.

Coverage varies depending on the porosity and condition of the wood. A general guide is approximately 10-15 square metres per litre, but always check the product packaging for the most accurate coverage information.

Yes, you can paint over existing compatible paintwork, provided the surface is clean, dry, and sound. Lightly sand glossy surfaces to improve adhesion.

Store in the original container with the lid tightly sealed in a cool, dry place, away from frost and direct sunlight. This will help preserve the paint for future use.

Stir the paint thoroughly. If necessary, thin slightly with water (check product label for recommended dilution ratio, typically up to 10%) for application on porous surfaces, but avoid over-thinning.

Ensure even application by working in consistent strokes. Avoid overworking the paint. Apply a second coat if needed after the first has dried.

Colours can appear different on screen versus on wood. Always test on a small, hidden area first. Ensure the base wood colour is not significantly affecting the final hue. Stirring thoroughly can also help ensure colour consistency.

This often indicates poor surface preparation or application in damp conditions. Scrape away loose paint, prepare the surface thoroughly, and reapply in dry weather.