Muriva Cove Industrial Textured Concrete Wall Wallpaper - Cream

This wallpaper requires a standard wallpaper paste. Always ensure you use a high-quality, pre-mixed or mixable adhesive designed for 'paste the paper' application, following the paste manufacturer's instructions for mixing and application.

Yes, the Muriva Cove wallpaper has a wipeable surface. For most marks or dust, simply use a clean, damp cloth to gently wipe the affected area. Avoid using harsh chemicals or abrasive materials, which could damage the texture or metallic finish.

While the wipeable surface offers some practicality, this wallpaper is primarily designed for and recommended in bedrooms and living rooms to add texture and warmth. For high-humidity environments like bathrooms, it is generally advised to choose wallpapers specifically formulated for such conditions.

An offset design match (64cm for this product) means that the pattern on the right edge of a strip will match the pattern on the left edge of the next strip, but it needs to be dropped (offset) by a specific distance (64cm) to align correctly. This requires careful measurement and cutting of each subsequent strip to ensure the pattern flows seamlessly across the wall.

To calculate the number of rolls, measure the height and total perimeter of your walls. Divide the total perimeter by the roll width (53cm) to find the number of strips needed. Then, divide the total area of your walls by the area of one roll (10.05m x 0.53m). Always account for the 64cm offset design match, which will result in some waste, and it's always recommended to purchase an extra roll to account for mistakes or future repairs. Consult a wallpaper calculator or professional for precise estimation. Info needed: Detailed calculation example based on room size.

This wallpaper is designed to be a finished decorative surface with its unique texture and metallic accents. Painting over it would obscure these features and is generally not recommended. If you desire a different color, it's best to remove this wallpaper and apply a new one or paint the wall directly.

This often occurs due to uneven paste application or trapped air. When hanging, ensure paste is applied evenly and smooth thoroughly from the center outwards. For dried bubbles, a fine needle can be used to puncture the bubble and release air, then gently smooth the area. If large, a small cut with a utility knife can release air and allow re-smoothing.

Visible seams can result from improper alignment, insufficient paste at edges, or paper shrinking. Ensure strips are perfectly butt-joined (not overlapped) and use a seam roller during installation to press edges firmly. If dry, carefully apply a small amount of seam adhesive with a fine brush under the lifting edge and press down.

The Muriva Cove wallpaper has a 64cm offset design match. Always cut your next strip by aligning the pattern to the previously hung strip *before* applying paste. Take your time, lay out lengths dry if necessary, and use a plumb line for the first strip to ensure a straight start, which makes subsequent matching easier.