Frenchic Wall Paint - Dusky Blush

No, this paint is self-priming, meaning it contains properties that allow it to adhere directly to most surfaces without a separate primer.

Yes, it's suitable for kitchen cupboards and walls. For bathrooms, it can be used on walls and tiles but avoid areas of constant direct water exposure like shower enclosures or bath surrounds.

The paint has a Class 1 Wet Scrub rating, meaning you can clean it with a damp cloth or a soft sponge and mild detergent. Avoid abrasive cleaners.

A 2.5l tin covers approximately 35m² with one coat, or around 17.5m² with two coats.

Yes, it is EN71-3 certified, making it safe for use on children's toys and furniture, and it has low VOCs with virtually no odour.

It has an ultra-matte finish, which is a very flat, non-reflective surface.

Yes, it can be used on interior wooden floors, provided they are properly prepared. For high-traffic areas, consider two coats for enhanced durability.

Ensure the surface was properly cleaned and prepared before painting. Remove any grease, dust, or old flaking paint. For non-porous surfaces, a light sanding may be required to create a better key for the paint.

Ensure the paint was thoroughly stirred before application. Use a good quality brush or roller and apply paint evenly, working in consistent strokes. Avoid overworking the paint in one area. Ensure adequate lighting during application.

Colour perception can vary depending on lighting conditions and surrounding colours. Ensure you have applied the recommended number of coats for full opacity. Test a small, inconspicuous area first if unsure.

Stir the paint thoroughly. If still very thick, a very small amount of water (no more than 5% by volume) can be added, but this may affect coverage and durability. Ensure paint has not been stored in freezing conditions.