Truly PVC Supplies 23mm Window Board 90° Internal Corner Joint - Caramel
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for DIY enthusiasts and professional tradespeople working with uPVC window boards. The Truly PVC Supplies internal corner joint provides a clean and professional finish for 23mm window boards, allowing for easy on-site customization. A potential consideration is its specific angle configurations, requiring users to select the correct joint for their application.
All features
| Colour | Brown |
|---|---|
| Brand | Truly PVC Supplies |
Extended Product Information
FAQs
What thickness of window board is this joint compatible with?
This corner joint is specifically designed for 23mm thick window boards.
What are the available angles for this joint?
The joint features one end with a 90° internal corner and the other end with a 135° internal corner.
Can I cut this joint to a specific size?
Yes, the joint can be easily cut to the exact size required for your installation using appropriate cutting tools.
What colors are available for this window board joint?
The joint is available in White, Chocolate Brown, and Caramel.
How should I clean the window board joint?
Clean with a soft, damp cloth. Avoid abrasive cleaners or solvents. A mild detergent diluted in water can be used if necessary.
Is this joint suitable for external corners?
No, this product is specifically an internal corner joint and is not suitable for external corners.
What is the weight of this product?
The product weighs approximately 0.05732018812 pounds.
Troubleshooting
Joint does not fit snugly
Ensure you are using the correct joint for 23mm window board and that the board edges are clean and square. Double-check your measurements and cuts.
Difficulty cutting the joint
Use a fine-tooth saw designed for plastics. Ensure the joint is securely held while cutting to prevent movement and chipping.
Color mismatch with existing boards
While available in common colors, slight batch variations can occur. For critical matches, it's best to order all necessary components at once.
Joint appears too loose after installation
Verify that the window boards are fully seated within the joint's channels. If further security is needed, consider using uPVC adhesive or appropriate fixings as per installation guidelines.
Pros and Cons
Pros
- Offers two common internal corner angles in a single product.
- Allows for on-site cutting to achieve exact dimensions.
- Provides a clean and professional finish for window board installations.
- Made from durable and long-lasting uPVC material.
- Available in multiple color options to match various décors.
Cons
- Limited to 23mm window board thickness.
- Only includes internal corner options; external corners would require a different solution.
- Requires accurate measurement and cutting for optimal results.
- Potential for color matching issues if not ordering from the same batch.
Setup, Compatibility & Care
Setup:
- Measure the required lengths for your window board sections.
- Determine which internal corner angle (90° or 135°) is needed for each joint.
- If necessary, carefully cut the uPVC window board and the corner joint to the exact size using a fine-tooth saw or appropriate cutting tool.
- Slide the window board sections into the respective channels of the corner joint.
- Ensure a snug fit. Use appropriate uPVC adhesive or fixings if required by your installation method.
Compatibility:
- This joint is specifically designed for 23mm thick window boards.
- It is intended for use with uPVC window boards.
Care:
- Clean with a soft, damp cloth.
- Avoid using abrasive cleaners or solvents, as they may damage the surface finish.
- For stubborn marks, a mild detergent diluted in water can be used, followed by rinsing with a clean, damp cloth.