Bridal Wide Fit Tina Satin Embellished Bow High Heel Stiletto Courts - White - UK 6

Due to the delicate satin material and stiletto heel, these shoes are best suited for indoor events or outdoor settings with firm, even surfaces (like paved patios). Soft ground or grass can damage the satin and cause the heel to sink.

These shoes feature a wide fit, which means they offer extra room. If you are typically between sizes, you might find that your standard UK 6 size is comfortable due to the wider design. However, if you have particularly narrow feet, you might consider sizing down half a size if available in other variants, or trying on to ensure the best fit.

The crystal-embellished bow is securely attached and is an integral part of the shoe's design. It is not designed to be removable without potentially damaging the shoe.

Regularly wipe the shoes with a soft, dry cloth after each use to remove dust. For deeper cleaning, use a very lightly dampened white cloth with water only, dabbing gently. Store them in their dust bag away from direct sunlight and humidity to prevent yellowing over time.

Yes, the wide fit design is specifically intended to provide enhanced comfort, allowing for extended wear and dancing. The 8cm stiletto heel also offers a good balance of height and stability. However, comfort is subjective, and breaking them in before your event is always recommended.

The shoes feature standard stiletto heel tips. Over time, these tips may wear down. They can typically be replaced by a professional cobbler to extend the life of your shoes.

While designed for comfort, individual foot shapes vary. Try wearing them for short periods at home to break them in. Consider thin, discreet gel cushions for pressure points or ensure your specific UK size 6 is the correct fit for you.

For light scuffs, try gently buffing with a very soft, clean, dry cloth. For more noticeable marks, use a slightly dampened cloth (water only) and blot very gently. If the scuff is deeper, a professional shoe repair specialist might be able to help, but satin can be challenging to repair perfectly.

If you still have the crystal, you can attempt to reattach it using a small amount of strong, clear craft glue (like E6000 or specific rhinestone glue). Apply the glue carefully to the shoe where the crystal was, then gently press the crystal into place. Allow ample drying time before wearing.