Living and Home Fireplace TV Stand - White

Assembly is required and typically takes 1-2 hours for one person, though having a second person can make the process easier. Clear, step-by-step instructions and all necessary hardware are included.

Yes, absolutely! The electric fireplace features an independent flame-only mode, allowing you to enjoy the ambiance and visual appeal of the flames without activating the heating function.

> Info needed: Max TV size and weight capacity. Please refer to the product specifications in your manual or contact customer service for precise details on maximum TV size and weight.

For the stand's white finish, use a soft, damp cloth and mild soap (if needed) then wipe dry. For the fireplace glass, ensure the unit is unplugged and cooled, then use a soft cloth with a non-abrasive glass cleaner. Do not spray cleaner directly onto the unit.

The fireplace glass remains cool to the touch, making it safer than traditional fireplaces. However, as with any electrical appliance, supervision is always recommended around young children and pets. Keep flammable materials clear of the unit's vents.

> Info needed: Power consumption details. Electric fireplaces typically consume electricity similar to a space heater. The exact consumption depends on whether the heat is on and the temperature setting. Refer to your product manual for specific wattage.

No, this Fireplace TV Stand is designed as a freestanding unit and is not intended for recessed installation into a wall. It requires proper air circulation around all sides.

Ensure the unit is properly plugged into a functional 120V outlet. Check if the main power switch on the fireplace insert (often located near the bottom or back) is turned 'ON'. Verify that the timer function isn't active or set to 0. Adjust the flame brightness setting.

Check the temperature setting. It might be set lower than the current room temperature or set to 'flame only' mode. Increase the desired temperature setting using the controls. Ensure no objects are blocking the heat output vents.

Carefully re-check all screws and fasteners according to the assembly manual. Tighten any loose connections. Ensure the stand is placed on a completely flat and level surface. If applicable, adjust any leveling feet.

Replace the batteries in the remote control. Ensure there is a clear line of sight between the remote and the fireplace receiver, and that no obstacles are blocking the signal. Check if the main power switch on the fireplace insert is 'ON'.

Turn off and unplug the unit. Check for any obstructions in the fan or internal components. If the noise persists after restarting, contact customer support. A slight hum from the fan is normal during operation.