Polycell Polyfilla Easy Sand Int/Filler 5Kg - White
Best current price£16.79from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£16.79Visit shop POLYCELL T POLYFILLA EASY SAND INT/FILLER 5KG
Visit shopeBay£16.79Visit shop All Offers
4 offers from £16.79 - £31.04
View price history by clicking the chart icon.
5KG POLYFILLA TRADE POLYFILLA EASY SAND INTERIOR FILLERFree delivery in 1–3 days£23.00Visit shop →
BradfordsPolyfilla Trade Easy Sand Interior Filler 5kg for Plasterboard Wood and Brick Surfaces
£5.95 delivery
£20.36
Visit shop
OnBuy.comPolycell Easy Sand Interior Polyfilla 5Kg [5213430] 5010212584941
Free delivery in 1–3 days
£31.04
Visit shop
Product Information
Full details
The Polycell Easy Sand Interior Filler is designed for DIY enthusiasts and professionals seeking a smooth, effortless finish for interior repairs. Its primary benefit is the exceptionally easy sanding capability, saving significant time and effort. A minor caveat is its drying time, which is dependent on environmental factors. This 5kg filler is ideal for patching cracks, holes, and imperfections in plaster, plasterboard, wood, brick, and stone, ensuring a surface ready for painting or wallpapering.
All features
| Colour | Beige |
|---|---|
| Model Part Number | 5213430 |
| Brand | Polycell |
Extended Product Information
FAQs
How long does the Polycell Easy Sand Interior Filler take to dry?
The filler dries in approximately 3.5 hours per 5mm layer. This drying time is influenced by temperature, humidity, and the depth of the area filled.
Can I use this filler outdoors?
No, this product is specifically formulated for interior use only and is not suitable for outdoor applications.
What surfaces can I use this filler on?
It is suitable for repairs to most indoor building materials, including plaster, plasterboard, wood, brick, and stone.
How long is the filler workable after mixing?
The filler remains workable for up to 1.5 hours after mixing, depending on the ambient temperature and humidity.
How do I clean my tools after use?
Clean your tools and utensils in warm water immediately after use.
Will the repaired area show through paint?
The filler is resistant to flashing and grinning, making it ideal for painting. For best results and to reduce visibility, it is recommended to apply two top coats of paint.
Can I paint over the filler straight away?
You can paint over the filler once it is fully dry. For optimal results, two top coats of paint are recommended.
Troubleshooting
Filler is too hard to sand
Ensure you are using the 'Easy Sand' variant. If the filler has been left too long after mixing or is over-mixed with too little water, it can become harder. For future applications, mix thoroughly and apply within the 1.5-hour workability window.
Filler has cracked or shrunk after drying
Ensure the surface was properly prepared and that the filler was mixed to the correct consistency. Avoid overfilling in a single application; for deep holes, apply in multiple layers, allowing each to partially dry. Also, check that the environmental conditions are not too extreme during drying.
Filler is not adhering to the surface
The surface may not have been clean, dry, or properly prepared. Ensure all dust, grease, and loose material are removed. For porous or powdery surfaces, pre-sealing is crucial for good adhesion.
Difficulty in smoothing the filler
Use a wet blade to smooth the filler immediately after application for a cleaner finish. Ensure you are working within the 1.5-hour workability period.
Pros and Cons
Pros
- Sands down easily, saving time and effort.
- Good workability time of up to 1.5 hours.
- Low shrinkage for stable repairs.
- Suitable for a variety of common interior building materials.
- Resistant to flashing and grinning for a better paint finish.
Cons
- Only suitable for indoor use.
- Drying time is variable and dependent on conditions.
- Requires surface preparation for best results.
Setup, Compatibility & Care
Surface Preparation:
Before application, ensure the surface is clean, dry, and free from dirt or grease. Remove any loose or flaking material. For surfaces prone to rust, such as nail or screw heads, it's recommended to cover them with an oil-based paint prior to filling. Highly absorbent or powdery surfaces should be sealed beforehand to ensure proper adhesion.
Mixing and Application:
Mix the filler with water using a ratio of 2 parts filler to 1 part water by volume. Stir thoroughly to achieve a smooth paste, adding small amounts of water or powder as needed. Clean tools should be used. Apply the mixture with a filling knife and smooth off the surface using a wet blade.
Drying and Completion:
The filler sets in approximately 3.5 hours per 5mm layer, though this can vary with temperature, humidity, and the depth of the filled area. Once fully dry, it can be rubbed down with abrasive paper if necessary. For best results and to minimize visibility through paint, apply two top coats.
Compatibility:
Suitable for repairs to most indoor building materials including plaster, plasterboard, wood, brick, and stone. Not suitable for outdoor use.
Tool Cleaning:
Clean all tools and utensils immediately after use with warm water.