Holden Decor Wood Slat Wallpaper - Pink - Striped

Clean the wall surface to remove any dirt or debris. Fill any holes or imperfections, and sand the surface smooth. Ensure the wall is dry before applying the wallpaper.

This wallpaper has a free design match, so you do not need to worry about matching a specific pattern repeat. Simply align the edges of each strip.

While the wallpaper is spongeable, it is not recommended for areas with excessive moisture. For bathrooms, ensure good ventilation.

The removal method depends on the wall surface and the type of adhesive used. Generally, you can try steaming the wallpaper to loosen the adhesive or use a wallpaper removal solution.

You will need wallpaper paste, a pasting table, a brush or roller, a smoothing tool, a sharp knife, a measuring tape, and a level.

This wallpaper has a free design match, with a 0cm design repeat.

Each roll is 10.05m in length and 53cm wide.

Ensure the wall is clean, dry, and properly prepared. Make sure you are using the correct type of wallpaper paste and that it is applied evenly. Allow sufficient drying time.

Use a smoothing tool to gently push the air bubbles towards the edges of the wallpaper. For stubborn bubbles, carefully prick them with a pin and smooth them down.

Ensure that the edges of the wallpaper are perfectly aligned. Use a seam roller to gently press the seams together. Check for any paste on the surface and wipe it off immediately.