Emuca Wardrobe Round Hanging Rail Kit - Grey - 1150mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Emuca Wardrobe Round Hanging Rail Kit is an ideal storage solution for homeowners and DIY enthusiasts looking to upgrade their closet organization. This kit offers robust support for heavy garments, capable of holding up to 40kg per meter, though users must ensure their wardrobe structure is sturdy enough to support the installation hardware.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 7070662 |
| Brand | Emuca |
Extended Product Information
FAQs
Can I cut the rails to fit a smaller closet?
Yes, the metal tubes can be cut to your desired length using a standard hacksaw suitable for metal.
What is the diameter of the hanging rail?
The rail has a diameter of 28mm.
Does the kit come with mounting screws?
Yes, the kit includes M5x38mm screws for mounting the end supports.
Can this rail be installed on a 18mm thick wardrobe board?
Yes, the brackets are designed for boards ranging from 16mm to 30mm thick.
What standard does this rail comply with?
This rail complies with ISO 7170:205 standards for strength and durability.
Are the end supports included in the pack?
Yes, all necessary end supports required for mounting are included in the kit.
Troubleshooting
Rail feels loose or wobbly
Check that the M5x38mm screws are fully tightened and ensure the end supports are flush against the panel.
Rail is bowing under weight
Redistribute garments evenly. If weight exceeds 40kg, consider adding a center support bracket for extra reinforcement.
Pros and Cons
Pros
- High weight capacity for heavy winter coats and professional attire
- Comprehensive kit includes all essential mounting hardware
- Clean, durable finish suitable for various closet aesthetics
- Simple top-fixing installation process
Cons
- Requires precise drilling to ensure rails are perfectly level
- The 1150mm length may require cutting for smaller wardrobe openings
- Not suitable for mounting onto hollow drywall or thin veneer without reinforcement
Setup, Compatibility & Care
To install, first measure your internal wardrobe width to ensure the 1150mm rail fits or determine the required cutting length. Using the provided M5x38mm screws, fasten the end supports to the side panels, ensuring they are perfectly level across from one another.
This kit is compatible with common wardrobe board thicknesses between 16mm and 30mm. For care, simply wipe the grey finish down with a soft, dry cloth to remove dust. Avoid using abrasive chemical cleaners, as these may degrade the protective coating on the rails. If the surface becomes scuffed over time, a mild soapy water solution is usually sufficient for cleaning.