Forgefix Self-Tapping Screws - Multicolor
Best current price£7.00from The Range
Best offers
Shopping.co.uk recommended and popular offers
The Range£7.00Visit shop Forgefix Self-Tapping Screws, Pozi, Pan Head, Zp C - Multi Colour
Visit shopThe Range£7.00Visit shop All Offers
4 offers from £7.00 - £7.47
View price history by clicking the chart icon.
The RangeForgefix Self-Tapping Screws, Pozi, Pan Head, Zp C - Multi Colour
£4.99 delivery
£7.00
Visit shop
OnBuy.comForgefix Self-Tapping Screws, Pozi, Pan Head, Zp 5063750489483
Free delivery in 1–3 days
£7.15
Visit shop
Forgefix Self-Tapping Screws, Pozi, Pan Head, ZpFree delivery in 1–3 days£7.15Visit shop →
B&Q - Forgefix Self-Tapping ScrewsPoziPan HeadZp Multi Colour (5/8 X 6)
Free delivery in 1–3 days
£7.47
Visit shop
Product Information
Full details
Designed for professionals and DIY enthusiasts alike, these Forgefix Pozidriv Self-Tapping Screws are essential fasteners for metal-to-metal or metal-to-plastic assemblies. They offer superior holding power and corrosion resistance due to their zinc-plated finish and single-thread design. While they are highly versatile for engineering and electrical applications, users must ensure they use the correct pilot hole size to prevent material stripping or screw snapping during installation.
All features
| Colour | Multicolor |
|---|---|
| Brand | Forgefix |
Extended Product Information
FAQs
Do I need to drill a pilot hole?
Yes, although they are self-tapping, a pre-drilled pilot hole is necessary to ensure the screw taps correctly into sheet metal without damaging the material.
Can these be used outdoors?
The zinc plating provides good indoor and limited outdoor protection, but they should not be used in marine or highly corrosive environments.
What is the difference between Phillips and Pozidriv?
Pozidriv heads have additional radial lines and are designed to allow higher torque application without cam-out compared to standard Phillips screws.
Can I use these for wood?
These are specifically designed for sheet metal and similar dense materials; they are not optimized for structural wood applications.
How do I measure the length of these screws?
For pan head screws, you should measure from the base of the head to the tip of the screw.
Troubleshooting
Screw head strips during installation
Ensure you are using the correct size Pozidriv bit and applying sufficient downward pressure to prevent cam-out.
Screw is difficult to drive into the metal
Verify that your pilot hole is the correct diameter; if the hole is too small, the screw will struggle to cut threads.
Material deforms under the screw head
Reduce the torque setting on your drill and ensure the hole is correctly chamfered if necessary.
Pros and Cons
Pros
- Excellent resistance to oxidation due to zinc plating
- Reduces surface deformation thanks to flat pan head profile
- High torque capacity with minimal cam-out
- Effective at resisting pull-out in sheet metal
Cons
- Requires precise pilot hole preparation
- Not suitable for heavy-duty structural wood framing
- Zinc plating may wear off in highly acidic or marine environments
Setup, Compatibility & Care
To achieve the best results, always measure the thickness of your material before selecting screw length. Use a power drill with a depth stop or a manual screwdriver to avoid overtightening. To ensure longevity, keep the screws stored in a dry, low-humidity environment to preserve the integrity of the zinc coating. When installing, use steady pressure to help the screw start its own thread in the pre-drilled pilot hole. Avoid using impact drivers on smaller gauge screws to prevent snapping the head off the shaft.