Hardwood Plywood - 2440mm x 1220mm x 18mm

While it features an external-grade veneer, it is not marine-grade. It can be used for semi-protected outdoor areas only if the edges are perfectly sealed and the surface is protected by high-quality exterior paint or marine varnish.

At 2440mm x 1220mm, the sheet is large and heavy. We recommend using a two-person lift or a flatbed trolley for transport.

It accepts standard wood screws well. For structural joints, use wood glue in addition to screws, and pre-drill pilot holes to prevent the hardwood layers from splitting.

It is recommended to lightly sand the surface and apply a quality wood primer first to ensure the topcoat adheres evenly.

This model is 18mm thick, which is a standard thickness for structural joinery and cabinetry.

Use a sharp, high-tooth-count saw blade and apply painter's tape across the cut line to hold the veneer fibers in place.

Lightly sand the area and use a wood filler suitable for plywood to level the surface before painting.

Ensure the sheet is stored perfectly flat on a level surface, preferably stacked with spacers to allow for airflow.