Furnished Made To Measure Day Light Roller Blinds With Metal Fittings - Blue

Measure the width and drop of your window recess precisely. Specify if the measurement is for 'Inside Recess' (fitting within the window frame) or 'Outside Recess' (covering the frame and extending onto the wall). Note that the drop length cannot be altered after ordering.

These are 'Day Light' roller blinds, designed to filter light. They are not blackout blinds and will allow some light to pass through. For complete darkness, a blackout roller blind would be required.

While this specific guide focuses on the Blue variant, Furnished offers these made-to-measure roller blinds in a range of colours including Cream, Brown, White, and Grey.

The metal fittings include the bracket system and the operating chain mechanism, ensuring durability and smooth operation of the roller blind.

No, the drop length is fixed once the blind is manufactured to your specific measurements and cannot be altered. You cannot shorten the drop.

Use a soft, slightly damp cloth to gently wipe the fabric. Avoid using abrasive cleaners or excessive water, as this can damage the material.

Check for any obstructions in the mechanism or on the fabric roll. Ensure the operating chain is not tangled. If the issue persists, the internal mechanism may require adjustment or professional attention.

Verify your original order measurements against the received blind. If the blind was cut incorrectly based on the provided measurements, contact the retailer. If the measurements provided were inaccurate, the drop length cannot be altered, and a new blind may need to be ordered.

Ensure the blind is installed perfectly level. If the issue is with the fabric itself, it may be a manufacturing defect. For slight sags, sometimes re-rolling the blind can help, but significant issues may require replacement.