Best current price£18.75from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£18.75Visit shop Ronseal 10 Year Weatherproof Exterior Wood Paint 750Ml - Satin Grey 5010214874651
Visit shop2 offers from £18.75
View price history by clicking the chart icon.
The Ronseal 10 Year Weatherproof Satin Finish Exterior Wood Paint in Grey is designed for homeowners seeking a durable, long-lasting finish for all exterior wood. Its key benefit is a guaranteed 10-year protection against weather damage, preventing cracking, peeling, and blistering. A potential caveat is its satin finish, which may not be preferred over gloss or matte by all users. This premium paint offers robust weather resistance and an attractive appearance for various exterior wood types.
| Colour | Grey |
|---|---|
| Model Part Number | WPGS750 |
| Brand | Ronseal |
The Ronseal 10 Year Weatherproof Exterior Wood Paint is guaranteed to protect your wood against cracking, peeling, and blistering for up to 10 years.
Yes, you can paint over existing sound, dry paintwork. Lightly sand the surface to provide a key and ensure it is clean and dry before applying Ronseal 10 Year Weatherproof Exterior Wood Paint.
The paint is weatherproof in just 1 hour. Recoating time is typically 4 hours under normal conditions.
This paint is suitable for all types of exterior wood, including sheds, fences, doors, windows, and garage doors. It can be used on both bare and previously painted or varnished wood.
The paint covers approximately 13.0m² per litre.
It provides a satin finish, which is a subtle sheen that enhances the wood grain while offering protection.
Clean your brushes and any spills with water immediately after use.
Ensure the wood surface was properly cleaned, dried, and prepared. Check for any contaminants like grease or old flaking paint. If applied over a solvent-based paint, ensure adequate keying through light sanding.
Ensure the paint was stirred thoroughly before application. Apply in thin, even coats. Avoid overworking the paint. Use a good quality brush or roller suitable for exterior paints.
This typically indicates moisture trapped within the wood or inadequate surface preparation. Ensure the wood is completely dry before painting and that all loose paint was removed. Allow sufficient drying time between coats.
Colour can vary depending on the lighting and the underlying wood tone. Always test on an inconspicuous area first. Ensure you have purchased the correct colour and batch.
Preparation: Ensure the wood surface is clean, dry, and free from dirt, grease, and loose paint. For best results on bare wood, apply one coat of Ronseal Wood Primer & Undercoat. For previously painted or varnished surfaces, lightly sand and clean thoroughly.
Application: Stir the paint thoroughly before use. Apply evenly with a brush or roller. Avoid applying in very wet, windy, or extremely hot conditions. Two coats are recommended for optimal protection and finish. Allow adequate drying time between coats as per the manufacturer's instructions.
Compatibility: Suitable for all types of exterior wood, including hardwoods and softwoods. It can be applied over existing oil-based or water-based paints, provided they are sound and properly prepared. Do not use on surfaces that will be in direct contact with food.
Care: Clean application tools with water immediately after use. For ongoing maintenance, clean the painted surface with a damp cloth and mild detergent as needed. Avoid abrasive cleaners.
