Best current price£30.49from The Range
Shopping.co.uk recommended and popular offers
The Range£30.49Visit shop Jcp Fixings Eta Nylon Frame Hexagon Head Fixings - 10 X 80Mm (Box Of 50) - White
Visit shop32 offers from £30.49 - £63.93
View price history by clicking the chart icon.
The JCP Fixings ETA Nylon Frame Fixings are designed for professionals and DIY enthusiasts who require a secure, long-lasting anchoring solution for door and window frames. These 10mm x 120mm fixings provide excellent load-bearing strength and reliability in a variety of construction substrates, though users should ensure their substrate is suitable for nylon anchor expansion to achieve maximum pull-out resistance.
| Colour | White |
|---|---|
| Model Part Number | 10 X 120mm |
| Brand | JCP Fixings |
Yes, but ensure the fixing bridges at least two webs of the hollow brick for adequate expansion.
You should use a 10mm masonry drill bit.
Yes, the nylon construction is resistant to moisture and weathering.
120mm refers to the total length of the fixing including the head.
A standard socket or spanner that fits the hex head diameter is sufficient.
Yes, the threaded design allows them to be unscrewed from the nylon sleeve.
The hole is likely too large or the masonry is too soft/friable. Use a smaller drill bit or a chemical resin anchor for damaged substrates.
Ensure your socket or hex driver is fully seated. Do not use an impact driver at high speeds; manual or low-speed power installation is recommended.
To install, always use a rotary hammer drill with a high-quality 10mm masonry bit to ensure the hole diameter is precise; an oversized hole will compromise the holding strength of the nylon anchor. Ensure the hole is cleared of all dust and masonry particles using a blower or wire brush before insertion. For maintenance, these fixings do not require active care; however, if you are removing or replacing a frame, the fixings are designed to be unscrewed, though they are primarily intended as a semi-permanent installation. Store the fixings in a cool, dry place to ensure the nylon remains supple and free from potential UV degradation prior to use.
