Hansgrohe Logis basin mixer tap 70 without waste - Silver

No, the Hansgrohe Logis basin mixer tap 70 (model 71071000) is sold without a waste set. You will need to purchase a compatible waste set separately.

The maximum flow rate at 3 bar pressure is 5 liters per minute, thanks to the integrated EcoSmart technology for water conservation.

AirPower enriches the water with air, creating softer, lighter droplets. This provides a more pleasant feel on the skin and significantly reduces splashing, keeping your sink area cleaner.

Yes, the tap features an ultra-safe function allowing for a temperature limitation to be set during installation. This is a safety feature to protect against scalding.

The spout projection (the distance from the center of the tap hole to the center of the spout) is 107 mm. This is part of the ComfortZone 70, providing practical space.

Hansgrohe typically offers a 5-year guarantee for the original purchaser on their taps, provided they are installed and maintained correctly. Spare parts are generally available for 15 years after discontinuation.

The tap is designed for a tap hole diameter of approximately 48mm.

The ceramic cartridge may be worn or contain debris. Clean the cartridge or replace it if necessary. Ensure the tap is fully turned off.

Check that the stop valves under the sink are fully open. Inspect the aerator for blockages (limescale or debris) and clean it. Ensure the flexible hoses are not kinked.

Ensure the hot and cold water supply lines are correctly connected. If a temperature limitation was set during installation and you require higher temperatures, adjust or remove the limiter (consult installation manual for your specific model).

Tighten the mounting hardware located underneath the basin. Ensure the base seal is properly seated.

This is less likely with AirPower technology. Ensure the aerator is correctly installed and not damaged. Check that the water pressure is not excessively high for the basin size.