Toupret Fine Finish Ready Mixed Finishing Plaster - 7000G Tub - White

Toupret Fine Finish Ready Mixed Plaster is suitable for use on most interior surfaces, including plasterboard, concrete, and painted surfaces.

It is recommended to prime the surface, especially on porous surfaces, to ensure proper adhesion. Always follow the primer manufacturer's instructions.

Drying times can vary depending on temperature, humidity, and the thickness of the application. Refer to the product packaging for specific drying times. Generally, allow at least 24 hours.

Yes, once the plaster is fully dry, you can paint directly onto it. Ensure the surface is clean and free from dust.

Store the remaining plaster in an airtight container in a cool, dry place to prevent it from drying out.

No, this plaster is specifically designed for interior use only.

Clean tools immediately after use with water.

Ensure the surface is properly prepared and free from dust and loose particles. Avoid applying the plaster too thickly in one coat. Ensure the room has adequate ventilation during drying.

Make sure the surface is primed if necessary. Ensure the surface is clean and dry before application. Lightly sand the surface if needed for better adhesion.

Apply the plaster in thin, even coats. Sand the surface lightly after drying to remove any imperfections.

Ensure adequate ventilation in the room. Avoid applying thick coats. Check the room temperature and humidity levels.