Best current price£11.19from The Range
Shopping.co.uk recommended and popular offers
The Range£11.19Visit shop Jcp Construction Products Sleeve Anchors Hexagon Nut Zyp - 16Mm/M12 X 110 (Box Of 10) - White
Visit shop29 offers from £11.19 - £21.26
View price history by clicking the chart icon.
The JCP Construction Products Sleeve Anchors Hexagon Nut is a high-performance fastening solution designed for both professional contractors and DIY enthusiasts who require reliable, heavy-duty attachments in concrete and masonry. Providing excellent holding power through a straightforward expansion mechanism, these anchors are ideal for securing structural elements, fixtures, and machinery; however, users must ensure they select the correct anchor size and length to match the load requirements and substrate depth of their specific project.
| Colour | Gold |
|---|---|
| Model Part Number | 10mm/M8 x 125 |
| Brand | JCP CONSTRUCTION PRODUCTS |
These are primarily designed for solid masonry and concrete. For hollow or soft brick, you may need specific wall plugs or different anchoring systems.
You should always drill slightly deeper than the length of the anchor to allow for dust accumulation and to ensure the anchor can be inserted fully.
You will need a rotary hammer drill, an appropriately sized masonry drill bit, a hammer, and a spanner or socket wrench to tighten the hexagon nut.
These anchors are designed for permanent or semi-permanent installation. While they can be unscrewed, the expansion sleeve usually remains in the hole.
The suitability depends on the specific finish. While the gold/ZYP finish provides some corrosion resistance, check your project environment requirements for rust prevention.
The drill hole may be too large. Ensure you are using a drill bit size that matches the manufacturer's specifications for the sleeve diameter.
Ensure the hole is clear of masonry dust. If the hole is too shallow, remove the anchor and drill to the full required depth.
To install, first drill a hole into your substrate equal to the diameter of the anchor sleeve. Ensure the hole is cleared of dust and debris before inserting the anchor. Tap the anchor into place until the washer is flush against the fixture, then tighten the hexagon nut until secure. These anchors are compatible with various solid surfaces like high-density concrete and masonry. Periodically check the tightness of the nut if the application is subject to vibration or dynamic loads over time.
