Draper Sander/Polisher - 1200W, 180mm

You can use any sanding discs and polishing pads that are designed for an 180mm sander with a hook and loop system.

Simply peel off the old disc and attach a new one to the hook and loop base. Make sure the disc is centered.

The variable speed control allows you to adjust the speed of the sander/polisher to suit the material you are working on, preventing damage and achieving the best finish.

Yes, the Draper Sander/Polisher is suitable for automotive polishing. Use polishing bonnets and appropriate compounds.

Use a soft, dry cloth to wipe down the exterior. Avoid getting moisture into the motor. Regularly clean the air vents to prevent overheating.

Turn off the tool and let it cool down before continuing. Ensure the air vents are clear and that you are not overworking the tool by applying too much pressure.

The lock-on switch allows you to run the sander/polisher continuously without holding the trigger, reducing user fatigue during prolonged use.

Please refer to the product documentation for warranty details. Standard warranty usually covers manufacturing defects.

Check the power supply and ensure the tool is properly plugged into a working outlet. Check the power cord for any damage. Check if the lock-on switch is engaged.

Check the condition of the sanding disc or polishing pad. Make sure that you are using the correct grit for the material and task. Adjust the speed setting to match the material. Apply consistent pressure without excessive force.

Ensure the sanding disc or polishing pad is correctly attached and not damaged. Check the balance of the disc/pad. Reduce the speed setting.