Long Spring Channel Nuts - M10 - Grey

No, these are specifically manufactured for M10 bolts. Using an M8 bolt will result in a loose fit and may compromise the safety of your installation.

No special tools are required for placement; however, you will need a wrench or socket set to tighten the M10 bolt securely.

Yes, the finish is designed for excellent corrosion resistance, making it suitable for outdoor environments, though severe chemical or saline exposure may require more specialized coatings.

The spring keeps the nut centered and pressed against the inner channel lips, preventing it from sliding around while you position your hardware.

If they have not been stripped or severely deformed during removal, they can generally be reused, though it is best practice to replace them if you notice thread damage.

Yes, we offer variant siblings in M8 and M12 sizes to accommodate different bolt requirements.

Ensure the spring is not jammed and that you are using a standard channel profile that supports the spring width.

Check that the bolt is truly an M10 size and that there is no paint or debris clogging the threads of the nut.

Apply slightly more pressure during the initial turn of the bolt to allow the nut to lock against the internal channel lips.