Dulux Trade Vinyl Matt Emulsion Paint - White

Dulux Trade Vinyl Matt is suitable for interior walls and ceilings, including drywall, plaster, and previously painted surfaces.

10L of Dulux Trade Vinyl Matt will typically cover up to 17 m² per litre, so a total of 170m².

Allow 2-4 hours between coats, depending on temperature and humidity.

While suitable for most rooms, consider a paint specifically designed for bathrooms due to the high humidity.

Clean brushes and rollers with water immediately after use. Remove as much paint as possible before cleaning.

The VOC content is minimal, contributing to a healthier indoor environment.

Store the paint in a cool, dry place, away from extreme temperatures and frost. Ensure the container is sealed tightly.

No, Dulux Trade Vinyl Matt is designed for interior use only.

Ensure thorough stirring of the paint. Apply an even coat and avoid overspreading. Apply a second coat after the recommended drying time.

Ensure the surface is properly prepared. Apply a second coat of paint. On darker surfaces, more coats might be needed for full opacity.

Ensure the room is well-ventilated. Check the temperature and humidity levels, as these can affect drying time. Allow the recommended drying time between coats.

Apply the paint evenly. Use a good quality brush or roller. Avoid applying too much paint at once.

Ensure you are not using old paint. Thin the paint with water, following the dilution guidelines (up to 1 part water to 10 parts paint for normal use).