Best current price£27.17from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£27.17Visit shop Phoenix Contact Black/Gray M12 5-Pin Sensor Cable 10M - 1694541
Visit shop5 offers from £27.17 - £76.27
View price history by clicking the chart icon.
This Phoenix Contact 1694541 sensor/actuator cable is designed for industrial environments, offering a reliable connection for sensors and actuators. Its key benefit is the durable, halogen-free PUR construction, ensuring safety and longevity. A potential caveat is its specific M12 A-coded connector, requiring compatible hardware. The cable features a 10-meter length, 5-position configuration, and IP65 rating for robust performance.
| Colour | Black |
|---|---|
| Model Part Number | 1694541 |
| Brand | Phoenix Contact |
A-coding is the standard for M12 connectors used in industrial automation, typically for sensors and power supply. It denotes a specific pinout and keying to prevent incorrect connections.
The cable is rated for IP65, meaning it is dust-tight and protected against water jets. However, continuous direct exposure to extreme weather or UV may degrade the PUR jacket over time. Consult specific environmental ratings for prolonged outdoor applications.
The cable is rated for 4A and 60V, making it suitable for powering low-power sensors and actuators. It is not intended for high-power applications. Always check the current draw of your device against the cable's rating.
Halogen-free cables do not contain halogens like chlorine or bromine. In the event of a fire, they produce less toxic and less corrosive smoke, which is a safety benefit in enclosed industrial spaces.
Refer to the product's specific wiring diagram or the documentation for your sensor/actuator. Typically, for a 5-position cable, one pin is for ground, and the other four are for signal or power (+V, signal 1, signal 2, etc.), depending on the device.
The outer diameter of this cable is approximately 5mm.
The cable is designed to operate reliably in temperatures ranging from -40°C to +80°C.
Verify the M12 connection is secure. Check the wiring at the free cable end for correct connections and continuity using a multimeter. Ensure the sensor itself is functioning and powered.
Inspect the cable for physical damage, such as cuts or abrasions. Ensure the M12 connector is clean and free from contaminants. Check for potential electromagnetic interference in the operating environment.
Ensure you are attempting to connect to an M12 A-coded socket. Check for any bent pins or debris in the connector housings. Verify the connector orientation.
Confirm the M12 connection is fully seated and the IP65 rating is maintained. Check the cable jacket for any breaches or damage that could compromise sealing.
Setup:
Compatibility:
Care:
