Sadolin Quick Dry Woodstain - Redwood
Best current price£55.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£55.99Visit shop B&Q - Quick Dry WoodstainRedwood2.5L
Visit shopB&Q£55.99Visit shop One Offer
1 offer from £55.99
View price history by clicking the chart icon.
Product Information
Full details
Sadolin Quick Dry Woodstain is a water-based exterior wood stain for homeowners and DIY enthusiasts seeking durable, fast-drying protection for windows, doors, and conservatories. Its key benefit is providing up to 6 years of protection while being rainproof in 20 minutes. However, it is not suitable for decking or floors.
All features
| Colour | Red |
|---|---|
| Brand | Sadolin |
Extended Product Information
FAQs
How long does Sadolin Quick Dry Woodstain last?
It provides up to 6 years of durability against flaking, peeling, and blistering when applied correctly.
Can I use this on my garden decking?
No, this product is not suitable for decking or floors. It is designed for vertical surfaces like windows, doors, and conservatories.
How soon can I apply a second coat?
You should allow at least 6 hours of drying time between coats.
What kind of finish does it provide?
It leaves a translucent, semi-gloss finish that enhances the natural beauty of the wood.
Is this product safe for the environment?
It is a water-based formulation with low VOC content, making it a more environmentally conscious choice compared to solvent-based alternatives.
How do I clean my brushes after use?
Clean brushes and equipment with water immediately after use.
What preparation is needed for bare wood?
Bare wood should be clean, dry, and free from resin. Treat non-preservative-treated softwood with two coats of Sadolin Quick Drying Wood Preserver, allowing 24 hours between coats, and fill any imperfections.
Troubleshooting
Woodstain is not drying properly.
Ensure you are applying in suitable temperatures (typically above 5°C) and humidity levels (below 85%). Check for excessively thick application or contamination on the surface. Allow more drying time if conditions are cool or damp.
Uneven colour or finish.
This can occur due to inadequate surface preparation or inconsistent application. Ensure the surface was properly cleaned and sanded. Apply coats evenly, maintaining a wet edge to avoid lap marks. Ensure product is well-mixed before and during application.
Peeling or flaking after application.
This is often due to inadequate preparation, moisture ingress, or applying over incompatible finishes (like creosote). Ensure surfaces were properly prepared, treated with preserver if necessary, and that the wood is dry. Remove affected areas, prepare again, and reapply.
Mold or algae reappearing.
Treat the affected area with a suitable mold and algae remover before applying the woodstain. Ensure good ventilation around the treated area to prevent recurrence.
Pros and Cons
Pros
- Dries quickly and becomes rainproof rapidly.
- Offers long-term durability (up to 6 years).
- Enhances natural wood appearance with a semi-gloss finish.
- Water-based formulation is easier to clean and has lower VOCs.
- Suitable for a range of common exterior joinery.
Cons
- Not suitable for use on decking or floors.
- Cannot be applied over existing creosote treatments.
- Requires specific preparation for bare timber, including potential wood preserver application.
- Two coats are recommended, with drying time between coats.
- Not suitable for use with linseed oil putty or non-setting compounds.
Setup, Compatibility & Care
Preparation:
- Clean Surfaces: Ensure all timber surfaces are clean, dry, and free from mould, algae, dust, and grease.
- Bare Timber: For bare wood, remove any resinous deposits and clean with methylated spirits. Fill any imperfections with a suitable wood filler. If the timber is non-preservative-treated softwood, apply two coats of Sadolin Quick Drying Wood Preserver, allowing 24 hours drying time between coats.
- Previously Stained Timber: Lightly abrade the surface and thoroughly remove all dust.
- Specific Areas: For glazing, finish beads, end grains, and rebates before fixing. Avoid using linseed oil putty or non-setting compounds.
Application:
- Apply two coats using a brush.
- Allow a minimum of 6 hours drying time between coats.
Compatibility:
- Not suitable for decking or floors.
- Cannot be applied over creosote.
Care:
- Clean application tools and spills with water immediately after use.
- For maintenance, clean surfaces with a mild detergent and water, rinse thoroughly, and allow to dry completely before re-coating if necessary.