Epson Ink Cartridge - Black

The Epson 35XL Black ink cartridge has a yield of up to 2,600 pages.

No, this cartridge is specifically designed for certain Epson WorkForce Pro models, including the WF-4740, WF-4730, WF-4735, WF-4720, and WF-4725 series.

DURABrite Ultra Ink is Epson's pigment-based ink technology that produces sharp, long-lasting, and robust documents resistant to water, smudges, and highlighter marks.

While this is an XL cartridge, Epson also offers standard size 35 series cartridges. For lower print volumes, a standard cartridge might be more appropriate, but the XL offers better cost-per-page.

The XL size offers a higher page yield, and the pigment ink technology is designed to be cost-effective, potentially offering up to 50 percent lower cost-per-page than competitive lasers on applicable models.

Supplying ink colors individually means you only replace the cartridge that has run out, preventing unnecessary waste and reducing overall ink expenditure.

Store unused ink cartridges in a cool, dry place, away from direct sunlight, and keep them in their original sealed packaging until ready for installation.

Ensure the cartridge is correctly installed and seated firmly in its slot. Re-open the cover, remove and re-insert the cartridge. Check that any protective seals were fully removed before installation.

Run the printer's built-in print head cleaning utility. Ensure you are using genuine Epson ink. Check that the correct paper type is selected in the print settings.

Even if the cartridge is new, the printer's sensor might need resetting. Try turning the printer off and on again. If the issue persists, consult your printer's manual or Epson support.

Ensure the ink has sufficient time to dry. Check that you are not printing on unsuitable paper. If printing double-sided, ensure the paper is not too thick. Use the quick-drying properties of the DURABrite ink to your advantage.