Best current price£165.50from B&Q
Shopping.co.uk recommended and popular offers
B&Q£165.50Visit shop B&Q - Drayton Square Top Low Single GatePressure Treated Scandinavian RedwoodW750 X H950 mm
Visit shop2 offers from £165.50 - £184.78
View price history by clicking the chart icon.
The Drayton Square Top Low Single Gate in Blue is designed for homeowners seeking to enhance garden security and aesthetics with a durable, traditional-looking gate. Its key benefit lies in the sturdy construction from pressure-treated Scandinavian Redwood, offering protection against decay. A potential caveat is that timber sizes may vary slightly, and a final finish is recommended.
| Colour | Black |
|---|---|
| Model Part Number | 5016635204251 |
| Brand | Burbage Iron Craft |
The gate dimensions are approximately 750mm in width and 950mm in height.
No, hinges and latch are not included and must be purchased separately.
The gate is pressure treated, but a final finish like stain or sealant is recommended for optimal protection and appearance. Ensure the timber is dry before applying any finish.
A made-to-measure service is available. Please inquire separately about custom sizing.
Due to its pressure-treated Scandinavian Redwood construction, the gate is designed for durability and resistance to decay, mould, and fungi. With proper care and maintenance, it should provide many years of service.
Pressure treatment forces a wood preservative deep into the timber under pressure, protecting it against decay, mould, and insect attack.
Yes, all timber gate sizes are subject to slight variation due to normal shrinkage or expansion of wood.
Check for any obstructions or uneven ground. Minor adjustments to hinges or post alignment may be necessary. Ensure the gate has adequate clearance. Natural timber expansion/contraction can cause temporary issues.
This is uncommon due to pressure treatment, but if noticed, clean the affected area and reapply a suitable wood preserver and finish. Ensure the gate has adequate drainage and is not in constant contact with damp soil.
Tighten or replace any loose or damaged hinges, latches, or bolts. Ensure all fixings are appropriate for outdoor use and the weight of the gate.
Setup: Installation will require appropriate gate hardware such as hinges and a latch, sold separately. Ensure gate posts are securely set in the ground. The gate should be hung to allow for slight ground clearance and to accommodate any natural timber movement.
Compatibility: This gate is designed to be fitted between two posts or existing structures. For consistent appearance, consider purchasing matching items from the Burbage Iron Craft range. Ensure any hardware chosen is compatible with the gate's thickness and weight.
Care: While pressure treated, a final finish such as a stain or sealant is recommended to further protect the timber and maintain its appearance. Reapply finishes periodically as per the product's instructions. Clean with a damp cloth; avoid abrasive cleaners. Inspect regularly for any signs of wear and address minor issues promptly.
