Citroen DS3 Cafe Racer Roof Graphics - Red
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for Citroen DS3 owners looking to customize their vehicle's appearance with a striking roof graphic. The key benefit is a unique, personalized look that stands out. A potential caveat is that the graphic is sent slightly oversized and requires trimming for a perfect fit. This product offers a visually distinctive 'Cafe Racer' style roof graphic available in various colors, designed for custom application.
All features
| Colour | Red |
|---|---|
| Brand | rewrapsandgraphics |
Extended Product Information
FAQs
What does 'slightly oversized' mean for application?
It means the graphic is intentionally made a bit larger than the exact roof dimensions. This allows you more flexibility during application and provides enough material to trim precisely along the roof edges for a clean, factory-like finish.
What tools will I need for application?
You will need a squeegee (or a plastic card with a soft cloth wrapped around it), a sharp craft knife or razor blade, and a cleaning solution (mild soap and water) to prepare the surface.
Can I order this graphic in a color other than red?
Yes, the product description states 'In Colours Of Your Choice' and 'All Colours Available', indicating that you can select your preferred color.
How long will the graphics last?
While specific lifespan isn't provided, vehicle graphics made from quality materials are designed to withstand outdoor conditions for several years when properly cared for.
Does this kit include instructions specific to the Citroen DS3?
The product is tailored for the Citroen DS3, and while general application principles apply, you should follow the outlined trimming guidance carefully to match the vehicle's specific roof shape.
What if I make a mistake during application?
Minor mistakes like small bubbles can often be fixed. For larger errors, especially during trimming, it may be necessary to purchase a replacement graphic. It's recommended to practice the trimming technique on a scrap piece if possible.
Troubleshooting
Air bubbles under the graphic
If small bubbles appear during application, try to lift the edge of the graphic slightly and re-smooth with a squeegee. For persistent bubbles, a pinprick can release trapped air, which should then be smoothed down.
Difficulty trimming the excess material
Use a very sharp, fresh blade on your craft knife or razor. Apply gentle, consistent pressure, following the body lines of the car. If the blade dulls, replace it immediately to prevent snagging or tearing the graphic.
Graphic not adhering properly
Ensure the surface was perfectly clean and dry before application. Reheat the graphic gently with a hairdryer (low heat setting) and re-apply pressure with a squeegee. Avoid applying in extreme temperatures.
Pros and Cons
Pros
- Allows for unique vehicle personalization.
- Offers a distinct visual upgrade for the Citroen DS3.
- Customizable color options ensure aesthetic compatibility.
- Designed with application ease in mind (oversized for trimming).
Cons
- Requires manual trimming for a perfect fit, which may be challenging for some users.
- Application requires careful attention to detail to avoid errors.
- Potential for minor errors during the trimming process if not done carefully.
Setup, Compatibility & Care
Setup & Application:
- Clean Surface: Ensure the DS3's roof is thoroughly cleaned, dried, and free from any dust, grease, or wax.
- Position Graphic: Carefully align the oversized graphic on the roof, ensuring even overhang on all sides.
- Apply Gently: Use a squeegee (or similar tool) to smooth out the graphic, working from the center outwards to avoid air bubbles.
- Trim Excess: Once positioned and applied, carefully trim the excess material around the edges of the roof using a sharp craft knife or razor blade. Follow the natural lines of the vehicle.
Compatibility:
- Designed specifically for the Citroen DS3 roof.
- Suitable for models where a full roof graphic application is desired.
Care:
- Clean the graphic with mild soap and water using a soft cloth or sponge.
- Avoid abrasive cleaners, high-pressure washers directly on the graphic edges, or harsh chemicals.
- Allow the graphic to cure for at least 48 hours before washing.