Regatta Waterproof Changing Robe - Blue

Yes, its waterproof and windproof outer layer combined with the warm Borg fleece lining makes it suitable for use in various weather conditions, from cool summer evenings to colder autumn and spring days. It provides protection against rain and wind, keeping you warm year-round, especially after water activities.

Hydrafort 5000 is Regatta's proprietary waterproof and windproof fabric technology. The '5000' refers to its hydrostatic head rating of 5000mm, indicating its level of waterproofing and ability to withstand water pressure before leakage. It ensures you stay dry in wet and windy conditions.

Yes, you can machine wash the robe. It is recommended to wash it in cold water (30°C / 86°F) on a gentle cycle with a mild detergent. Do not use fabric softeners or bleach. Always hang dry and do not tumble dry, as high heat can damage the waterproof coating and fleece lining.

While the Borg fleece lining is soft and warm, its primary function is insulation and comfort. It will absorb some moisture from your skin, but it's not a highly absorbent 'towel' material. It's best to towel off excess water before putting on the robe for maximum comfort and quicker drying of the robe itself.

The inner security pocket is designed to protect items from light moisture and provide discreet storage. The two lower external pockets are generally not considered fully waterproof, but rather designed for convenience and hand-warming. For electronics or items sensitive to water, it's always best to use a separate dry bag or waterproof pouch inside the pockets.

The Regatta Waterproof Changing Robe is designed with an 'oversized fit' to provide ample room for changing underneath and to accommodate a broad range of adult body types. While there might not be multiple traditional 'sizes' (S, M, L), its generous cut is intended to fit most adults comfortably.

To maintain the waterproof quality, regularly clean the robe as per care instructions. Over time, the Durable Water Repellent (DWR) finish on the outer fabric may wear off, causing water to soak in rather than bead. When this happens, you can reapply a DWR treatment specifically designed for technical outerwear, following the product's instructions.

Ensure the robe is hung inside out in a well-ventilated area after use to allow the fleece lining to dry thoroughly. Avoid damp environments for drying. If the outer fabric is also damp, hang it right side out first to shed water, then reverse for the inner fleece.

Check if the Durable Water Repellent (DWR) finish needs refreshing. Over time, the DWR can wear off. You can reapply a spray-on or wash-in DWR treatment specifically designed for waterproof breathable fabrics. Also, check for any tears or damage to the fabric or taped seams.

Avoid using fabric softeners, as they can clog fleece fibers. Wash with mild detergent and air dry. Gentle brushing with a soft brush once dry can sometimes help restore loft, but avoid excessive rubbing.

Due to its oversized design and thick fleece lining, the robe is inherently bulky. To minimize its packed size, roll it tightly from one end to the other, expelling as much air as possible. A compression sack (not included) could also be used for transport, though care should be taken not to damage the fabric.