Best current price£15.70from eBay
Shopping.co.uk recommended and popular offers
eBay£15.70Visit shop Varilight XS77D Matt Chrome 2 Gang Intermediate Rocker Switch Metal Rockers
Visit shop2 offers from £15.70 - £20.90
View price history by clicking the chart icon.
The Varilight 2-Gang 10A Intermediate Rocker Light Switch is ideal for homeowners, DIY enthusiasts, and trade professionals seeking a durable and aesthetically pleasing control solution for complex lighting setups. This switch excels in providing reliable operation for 3-way or multi-point lighting circuits, allowing you to control lights from three or more locations, though it requires a minimum back box depth of 25mm for a secure and flush installation.
| Colour | Silver |
|---|---|
| Model Part Number | XS77D |
| Brand | Varilight |
An intermediate switch is used in a circuit that controls a single light from three or more locations, used in combination with two-way switches.
While it can be wired to function, it is designed for intermediate circuits and is more complex than a standard switch.
This switch is intended for standard indoor environments; please check your local regulations for IP rating requirements in bathroom zones.
No, the switch unit is designed to fit into a standard UK 2-gang back box, which must be purchased separately if one is not already installed.
Simply wipe with a clean, dry, non-abrasive cloth to remove fingerprints and dust.
Verify that the wiring follows the intermediate switching circuit diagram; often the traveler wires may be swapped at the switch terminals.
Ensure the mounting screws are fully tightened and the back box is firmly fixed in the wall cavity.
Check that the back box depth is at least 25mm; a shallower box will prevent the switch from seating correctly.
To install this switch, ensure you have a standard 2-gang wall box with a minimum depth of 25mm. Turn off the mains power at the consumer unit before beginning any work. The switch follows standard intermediate wiring patterns: identify the 'common' wires and the 'traveler' wires from your existing multi-point circuit. Use a soft, dry cloth to clean the silver finish, avoiding abrasive chemicals that could tarnish the metallic coating. If you are unsure about the wiring configuration, consult a qualified electrician to ensure safety and compliance with building regulations.
