Acid Etch Primer for Aluminium & Other Metals - White - 5L
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Guard ETC Single Pack Acid-Etch Primer is designed for professionals and DIY enthusiasts tackling challenging metal surfaces, particularly aluminum and zinc. Its key benefit is providing excellent adhesion on difficult substrates, ensuring a durable finish. A potential caveat is its specific application as a primer, requiring a topcoat for full protection and aesthetic completion. This primer offers a quick-drying, matt finish and is available in a 5-liter pack.
All features
| Colour | White |
|---|---|
| Brand | Guard |
Extended Product Information
FAQs
What surfaces can this primer be used on?
This primer is specifically designed for difficult metal substrates including Aluminium and Zinc. It is also suitable for other challenging metal surfaces.
Do I need to use a topcoat?
Yes, this product is an acid-etch primer. A compatible topcoat must be applied over it to achieve the desired finish and provide full protection.
What finish does the primer provide?
The primer provides a matt finish.
How quickly does it dry?
It is a very quick-drying primer, which helps to speed up project timelines.
What sizes is it available in?
This primer is available in 5 Litre packs.
What colors are available?
It is available in Black, Grey, and White.
How should I prepare the surface before application?
The surface must be clean, dry, and free from grease, oil, and contaminants. Light abrasion may be necessary, followed by cleaning with a suitable solvent.
Troubleshooting
Primer not adhering well
Ensure the surface was thoroughly cleaned and degreased before application. Lightly abrading the surface can also improve adhesion.
Runs or drips during application
Apply the primer in thin, even coats. Avoid over-application and allow each coat to flash off if necessary, according to temperature and humidity.
Slow drying time
Drying times can be affected by temperature and humidity. Ensure application in recommended conditions. Avoid applying excessively thick coats, as this will increase drying time.
Poor finish after topcoat
Verify that the primer was fully dry before applying the topcoat. Ensure the topcoat is compatible with the acid-etch primer and applied correctly.
Pros and Cons
Pros
- Excellent adhesion on hard-to-prime metals like aluminum and zinc.
- Fast drying time speeds up the painting process.
- Matt finish provides a good base for topcoats.
- Suitable for a range of metal surfaces.
Cons
- Requires a topcoat for full protection and desired appearance.
- Only available in a 5-litre pack, which may be excessive for small jobs.
- Specific application requiring proper surface preparation.
Setup, Compatibility & Care
Setup: Ensure the metal surface is clean, dry, and free from grease, oil, and contaminants. Lightly abrade the surface if necessary, and wipe clean with a suitable solvent. Apply a thin, even coat of the primer using a brush, roller, or spray gun. Allow to dry completely before applying your chosen topcoat.
Compatibility: This primer is designed for use on difficult metal substrates including aluminum and zinc. It is intended to be used as a primer and requires a compatible topcoat for full protection and desired finish. Always check the compatibility of your chosen topcoat with this primer.
Care: Store the primer in a cool, dry place away from direct sunlight and extreme temperatures. Keep the container tightly sealed when not in use. Dispose of unused product and empty containers according to local regulations.