Regatta Natalina Waterproof Jacket - Black

Isotex 30000 refers to the fabric's rating for waterproofness and breathability. It indicates a hydrostatic head of 30,000mm (waterproofness) and a breathability rating of 30,000g/m²/24 hours (moisture vapor transmission).

The jacket itself is waterproof and windproof, providing a good shell. For very cold weather, it is designed to be layered over insulating mid-layers such as fleece or down jackets.

Regular washing with a mild detergent and occasional re-application of a DWR (Durable Water Repellent) treatment will help maintain its waterproof properties. Avoid fabric softeners and harsh detergents.

No, the hood is a grown-on technical hood and is not designed to be removed.

Waterproof means the fabric is impermeable to water under pressure (like heavy rain). Water-repellent (DWR) is a finish that causes water to bead up and roll off the surface, preventing the outer fabric from becoming saturated, which helps maintain breathability.

This jacket is ideal for hiking, trekking, outdoor adventures, and any activity where you need reliable protection from rain and wind while maintaining breathability.

Ensure seams are properly sealed. If the waterproof treatment has worn off, consider re-applying a suitable DWR treatment. Check that the taped seams are intact and not peeling.

This could be due to a lack of breathability. Ensure the jacket is clean, as dirt and oils can clog the membrane pores. Check that the inner lining is not trapped in the main zipper.

Adjust the hood using the integrated adjusters. Ensure the wire peak is correctly shaped. Verify the VisionAlign system is functioning as intended by moving your head naturally.

Clean the zipper teeth carefully with a damp cloth and allow to dry. Apply a silicone-based lubricant or a specialized zipper wax to ensure smooth operation.