Bathroom Shaver Wall Light - LITECRAFT - Gold

No, the LED light source is integrated and non-replaceable. The product is designed with an average lifespan of 30,000 hours.

The IP44 rating indicates that the light is protected against solid objects larger than 1mm and protected against water splashes from any direction, making it safe for use in most bathroom areas.

The colour temperature can be adjusted by touching the sensor control. A short touch typically cycles through the colour temperatures (3000k to 6500k).

To dim the light, press and hold the touch-sensitive sensor. The brightness will decrease gradually. Release the sensor when the desired brightness is reached. Press and hold again to increase brightness.

Please refer to the retailer or manufacturer's warranty information for specific details on the warranty period.

With an IP44 rating, this light is protected against splashes but is not designed for direct submersion or installation within the shower enclosure (Zone 0 or 1). It is best suited for Zone 2 and general bathroom wall lighting.

The integrated shaver socket is typically designed for low-power shavers and electric toothbrushes that use a standard shaver plug.

Ensure the power supply is connected and the circuit breaker is in the 'on' position. Check all wiring connections. If the issue persists, contact a qualified electrician.

Verify that the shaver socket is correctly wired and receiving power. Test the shaver or toothbrush on another known working socket to rule out an issue with the appliance.

Ensure the surface of the touch sensor is clean and dry. Try turning the power off and on at the mains to reset the unit. If the problem continues, professional inspection may be required.

Check for loose wiring connections. Ensure the mains voltage is stable. If the LED itself is failing, the unit may need replacement as the LED is non-replaceable.