Best current price£6.82from PCHUB.UK
Shopping.co.uk recommended and popular offers
PCHUB.UK£6.82Visit shop Connektgear Men's Gold 1M Hdmi V2.0 4K Uhd Connector Cable - To Co
Visit shop11 offers from £6.82 - £39.69
View price history by clicking the chart icon.
The Connekt Gear 10m HDMI V2.0 cable is an ideal solution for home theater enthusiasts and professionals needing reliable high-definition connectivity over long distances. Supporting 4K Ultra HD resolution, 3D video, and Ethernet pass-through, this cable ensures a consistent, lag-free signal for your displays. While its 10-meter length offers exceptional flexibility for room-wide setups, users should ensure the cable is managed carefully to avoid sharp bends that could compromise signal integrity over long runs.
| Colour | Gold |
|---|---|
| Model Part Number | 26-71004K |
| Brand | connektgear |
Yes, this is a standard HDMI cable and signal can flow in either direction between your source and your display.
Yes, this cable supports a maximum refresh rate of 120 Hz, provided your display and source device also support this frequency.
The ferrite cores act as filters to suppress high-frequency electromagnetic interference, helping to keep your signal clean over the 10m distance.
Yes, it is fully compatible with 3D video signals when connected to 3D-capable devices.
The cable uses a standard PVC jacket which provides a balance of durability and flexibility for routing through cable management systems.
Yes, it features an HDMI Ethernet Channel, allowing for network data transfer between devices.
Ensure both ends of the cable are securely pushed into the HDMI ports and verify that the source device is set to the correct input channel.
Verify that the connection is secure. If the issue persists, ensure the cable is not running parallel to power cables, which can cause electromagnetic interference.
Check that your source device and monitor both support HDMI 2.0 and the 4K resolution settings; also ensure your graphics drivers or device firmware are updated.
Setup is straightforward due to the Plug and Play design; simply connect the HDMI Type A male connectors to the corresponding ports on your source and output devices.
