Terracotta Weep Vents
Pack of 5
Suitable for commercial and domestic use.
British Made.
Satisfies...Terracotta Weep Vents
Pack of 5
Suitable for commercial and domestic use.
British Made.
Satisfies NHBC Standards.
Manufactured to BS EN ISO 9001.
Dimensions 100mm x 64mm x 10mm.
Available in a range of colours in our shop.
The product can be slotted between two bricks and mortared into position. It provides an unobtrusive ventilation point for the cavity behind.
The vent has a baffled grille to prevent the ingress of driving rain and wind whilst incorporating an insect grille and drip lip.
This grille is sized to keep out large insects but is wide enough that it will not be blocked by debris, paint or water droplets.
Use:
Any situation where water must be discharged from an external wall, e.g:
At ground floor slab level
Within cavity tray systems
Over external lintels
Where a cavity must be ventilated
On external walls - 100mm or more in thickness - built from brick, block or stone.
Features & benefits:
Purpose made and pre-formed to guarantee reliable discharge of water
Less prone to inadvertent pointing-up than weep holes formed by simply leaving the perp. joint open
Integral front grille prevents entry of large nest building insects into the cavity
4mm wide front aperture prevents entry of large nest building insects into the cavity
Range of colours to blend with brick or mortar colour
Quality:
Satisfies all NHBC Standards 2006 Edition
Manufactured to BS EN ISO 9001 : 2000
Complies with all relevant Building Regulations
Meets all relevant British Standards.
Also known as: Terracotta Brick Weep Vents. Pack of 5. Dimensions 100 x 64 x 10mm. Satisfies NHBC Standards British Made. Manufactured to BS EN ISO 9001.
- 5 X Terracotta Brick Weep Vents Ventilation Cavity Wall Vent & Retaining WallsFree delivery in 1–3 days£9.39Visit shop →
- 10 X Brown Brick Weep Vents Ventilation Cavity Wall Vent & Retaining WallsFree delivery in 1–3 days£13.59Visit shop →
- 50 X Brown Brick Weep Vents Ventilation Cavity Wall Vent & Retaining WallsFree delivery in 1–3 days£46.09Visit shop →
Product Information
Full details
Terracotta Weep Vents
Pack of 5
Suitable for commercial and domestic use.
British Made.
Satisfies NHBC Standards.
Manufactured to BS EN ISO 9001.
Dimensions 100mm x 64mm x 10mm.
Available in a range of colours in our shop.
The product can be slotted between two bricks and mortared into position. It provides an unobtrusive ventilation point for the cavity behind.
The vent has a baffled grille to prevent the ingress of driving rain and wind whilst incorporating an insect grille and drip lip.
This grille is sized to keep out large insects but is wide enough that it will not be blocked by debris, paint or water droplets.
Use:
Any situation where water must be discharged from an external wall, e.g:
At ground floor slab level
Within cavity tray systems
Over external lintels
Where a cavity must be ventilated
On external walls - 100mm or more in thickness - built from brick, block or stone.
Features & benefits:
Purpose made and pre-formed to guarantee reliable discharge of water
Less prone to inadvertent pointing-up than weep holes formed by simply leaving the perp. joint open
Integral front grille prevents entry of large nest building insects into the cavity
4mm wide front aperture prevents entry of large nest building insects into the cavity
Range of colours to blend with brick or mortar colour
Quality:
Satisfies all NHBC Standards 2006 Edition
Manufactured to BS EN ISO 9001 : 2000
Complies with all relevant Building Regulations
Meets all relevant British Standards.
Also known as: Terracotta Brick Weep Vents. Pack of 5. Dimensions 100 x 64 x 10mm. Satisfies NHBC Standards British Made. Manufactured to BS EN ISO 9001.